Drill sharpener Drill Doctor The DD750X model is designed for durability and has the flexibilty required to sharpen the largest range and most popular sizes of dull or broken drill bits - including split points and masonry bits. The DD750X also adds increased capacity sharpening 2.5-19 mm drill bits. The precision and accuracy of the DD750X makes this to the top of line model. ● An easy way to get perfect sharpened drill bits ● Drill Doctor has been sold in over 3 million units - A well established drill grinding manufacturer ● Integrated fixture in the machine chuck ● Stable drill chuck holds each drill in exact right position during grinding ● With a few turn of the drill chuck, the drill get sharpened in perfect angle ● The diamond wheel is sufficient to hundreds of grindings ● User replaceable diamond griding wheel design for simple replacement ● Strong, impact-resistant and double insulated body

Drill doctor demostration video is found under the video tab

DD750X ● Sharpens between 118° and 135° point angle ● Sharpens the dimensions 19 mm ● Preferred grinding depth can be preset ● Creates split-point bits from standard bits ● For HSS, carbide, TiN-coated, concrete, mansonry and cobalt drill bits ● New "Push to Stop" design on the drill point splitting port will not allow you to over split the bit point ● New permanent magnet motor produces consistent power, regardless of speed or load ● Longer jaws hold bit more precisely and jaw guides eliminate jaw twisting on small bits ● Quick change diamond wheel ● Can sharpen - reverse-twist (left-hand) drill bits with optional accessory, ● Hard carrying case is included

Accessories Chuck for drill bits 2.5-19 mm Chuck for left-hand drill bits Diamond wheel standard 180 Diamond wheel coarse 100

Price:SKr 2,950.00

Suitable for following sharpener Tormek T-7

Price:SKr 915.00

Knife Jig For most knives. Width 45 mm. Long knives need to be stiff. Min blade length 60 mm. Also for carvers draw knives.

Short Tool Jig For straight shanked carving gouges and V-tools down to 45 mm length. Short wood chisels and tools for power carvers. Max. tool width 32 mm.

Long Knife Jig Suitable for long and flexible knives. The 140 mm width of the jig stabilizes a thin blade. Min blade length 160 mm.

Axe Jig For carving and carpenter's axes. Max. axe size 170 mm.

Scissors Jig For scissors of all sizes and shears. Also suitable for portable electric hand planer blades.

TNT-708

+

HTK-705

+

SVH-320

+

SVP-80

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 670.00

The new T-3 model improves the accuracy and safety when sharpening wood chisels and plane irons thanks to the Square Edge Jig SE-76, which is used at the shaping and sharpening of the edge. Honing on the leather honing wheel is carried out without the jig and with the Universal Support as a tool rest. Conventional jigs on the market require that you align the tool in the jig with two mounting screws which is time consuming and you lose the exact repeatability when re-sharpening. The new Tormek Square Edge jig solves this problem and the chisel will be lined up squarely, i.e. at 90 degrees, each time without any adjustments. This is achieved because the jig automatically aligns the chisel to its flat, machined face. Another benefit is that the SE-76 can also clamp short and tapered tools firmly, e.g. Japanese chisels. The jig copes with blades up to 76 mm width. The new Square Edge Jig SE-76 has safety stops, which prevent the tool from slipping off the stone, which can hurt your fingers.

Tormek T-3 Sharpening system SE-76 Square Edge Jig

Jig solutions for the T-3 model SVM-45 Knife Jig SVM-140 Long Knife Jig SVM-150 Scissors JIG SVA-170 Axe JIG SVS-32 Short Tool Jig SVD-185 Gouge Jig SVS-50 Multi Jig SVD-110 Tool Rest SE-76 Square Edge Jig SVH-320 Planer Blade SVP-80 Moulding Knife  DBS-22 Drill Bit Sharpen.

Accessories for the T-3 model TT-50 Truing Tool SP-650 Stone Grader LA-120 Leather Honing Wh. WM-200 AngleMaster TTS-100 Turning Tool Setter PA-70 Honing Compound HB-10 Handbook TNT-300 Woodturner's Instr BGM-100 Bench Mounting Set TNT-708 Woodturner's Kit HTK-705 Hand Tool Kit

SG-200 Original Grindstone

SJ-200 Japan. Waterstone

Price:SKr 2,280.00

Suitable for following sharpener Tormek T-3

Price:SKr 555.00

Features The new T-7 model improves the accuracy and safety in edge tool sharpening thanks to two new innovations, a Square Edge Jig SE-76, and a Truing and Dressing Tool with screw feed, the TT-50. These developments also make the sharpening more user friendly. Conventional jigs on the market require that you align the tool in the jig with two mounting screws which is time consuming and you lose the exact repeatability at each sharpening. The new Tormek Square Edge jig solves this problem and the chisel will be lined up square, i.e. at 90 degrees, each time without any adjustments. This is achieved because the jig automatically aligns the chisel to its flat, machined face. Another benefit is that the SE-76 can also clamp short and tapered tools firmly, e.g. Japanese chisels. The jig copes with blades up to 76 mm or 3" width. The new Square Edge Jig SE-76 has safety stops, which prevent the tool from slipping off the stone, which can hurt your fingers. The other development is a Truing and Dressing Tool TT-50 with screw feed. This enables the user to keep the stone in perfect condition, which is essential for a perfectly sharpened edge. A seven year warranty applies to all customers including industrial users. This is possible due to the improved coating of the housing, stainless steel main shaft and a powerful, industrial AC motor, which is designed for continuous operation.

Included in Tormek T-7 Sharpening system  SE-76 Square Edge Jig TT-50 Truing and Dressing Tool

Jig solutions for the T-7 model SVM-45 Knife Jig SVM-140 Long Knife Jig SVM-150 Scissors JIG SVA-170 Axe JIG SVS-32 Short Tool Jig SVD-185 Gouge Jig SVS-50 Multi Jig SVD-110 Tool Rest SE-76 Square Edge Jig SVH-320 Planer Blade SVP-80 Moulding Knife  DBS-22 Drill Bit Sharpen.

Accessories for the T-7 model TT-50 Truing Tool SP-650 Stone Grader LA-120 Leather Honing Wh. WM-200 AngleMaster TTS-100 Turning Tool Setter PA-70 Honing Compound HB-10 Handbook TNT-300 Woodturner's Instr BGM-100 Bench Mounting Set TNT-708 Woodturner's Kit HTK-705 Hand Tool Kit

SG-250 Original Grindstone

SJ-250 Japan. Waterstone

SB-250 Blackstone Silicon

Price:SKr 3,995.00

Sunnex OSM is a series of machine mounts specially produced for applications where stringent demands are imposed on effective vibration damping and reduction of troublesome noise emitted from machinery and eqiupment. Sunnex OSM consists of a fine threaded pressure plate that is adjusted by an integrated levelling bolt. The design rest on a steel chassis and a thick rubber damping element that withstands most types of grease, acid, oil and cooling emulsion normally used in industry. A tried and tested design with good levelling characteristics makes the Sunnex OSM the natural choice for the majority of machine types used in industry. Dimensions

● Withstands loads up to 5000 kg per machine mount ● Excellent levelling characteristics ● Effective vibration damping ● Reduces troublesome noise produced by machinery and equipment

Price:SKr 0.00

Price:SKr 340.00

Price:SKr 340.00

Price:SKr 260.00

Price:SKr 650.00

Price:SKr 340.00

Price:SKr 340.00

Price:SKr 510.00

Price:SKr 340.00

Price:SKr 340.00

Price:SKr 340.00

Tool sharpener Work Sharp WS3000 The Work Sharp 3000 is used for sharpening large turning tools quickly and efficiently while also providing a means to sharpen and hone carving tools, especially the smaller profiles that require a more delicate touch. This is an air cooled, dry sharpening system that uses maintenance free 150mm tempered glass wheels to which you adhere PSA abrasives. Slotted "see-through" wheel allows for fast and precise sharpening of carving and lathe tools. The precise and repeatable sharpening port enables sharpening of 20, 25, 30, and 35 degree angle chisels and plane irons up to 50 mm wide. No jigs are needed; just select angle and sharpen. Lapping abrasive in the sharpening port increases burr removal and speeds sharpening. The rigid bevel angle settings and skew cam provide precise positioning of the sharpening port. Bevel and skew geometry are not affected by wheel diameter, chisel size, or complex user setup. Forced air-cooling and the sharpening port heat sink allow for higher material removal rates without affecting the steel temper. It allows for quick reshaping of a new or damaged chisel, and fast honing of a micro bevel. The precise bevel angles are set in the sharpening port, not in a fixture or jig, so switching between angles is simple and fast. No re-calibration is required for changing wheel diameter or tool size. Coarse grind for rapid shaping and then micro-fine hone all in one port. ● Work Sharp is a precision bench grinder and a tool sharpener with innovative systems ● Specially produced for wood working tools ● Sharpens most commonly used tools such as screwdrivers, chisels, cape chisels, knives etc. ● High precision and perfect results ● The WS3000 offers 3 ways to sharpen and grind; top side with tool rest, the chisel and plane iron port and the edge-vision port ● The sharpening port is air cooled, which minimize the risk that the tools are overheated during sharpening ●  The open grinding wheel gives a good overview of griding work and you are always in full control of the grinding result ● 2 years warranty Please note, the WS3000 is an EU-version, delivered with a Swedish electrical cord and 220 volt.  Technical Data WS3000 Sharpening Port bevel angle Sharpening Port max. width Wheel speed Cooling Grinding wheel Motor Housing Measure Weight Adjustable 20°, 25°, 30°, 35° 50 mm 580 rpm Air P400, Ceramic Induction motor IA-20 Metal 500x305x370 mm 6 kg

Included accessories WS3000 Two glass wheels, one slotted Edge-Vision wheel, a crepe stick (for cleaning abrasives), an instructional DVD, and 16 abrasives: 11 solid abrasives and 5 slotted abrasives with grits ranging from P80 to 3600 Micro-Mesh

Accessories Edge-Vision  wheel Tempered glass wheel Fine  abrasive kit Slotted abrasive kit Coarse abrasive kit Leather hone kit Honing  abrasive kit

Price:SKr 1,865.00

Price:SKr 780.00

Price:SKr 780.00

Price:SKr 467.00

Price:SKr 467.00

Drill sharpener Drill Doctor ● An easy way to get perfect sharpened drill bits ● Drill Doctor has been sold in over 3 million units - A well established drill grinding manufacturer ● Integrated fixture in the machine chuck ● Stable drill chuck holds each drill in exact right position during grinding ● With a few turn of the drill chuck, the drill get sharpened in perfect angle ● The diamond wheel is sufficient to hundreds of grindings ● User replaceable diamond griding wheel design for simple replacement ● Strong, impact-resistant and double insulated body

Drill doctor demostration video is found under the video tab

DD3660X ● Sharpens 118 degree point angle ● Sharpens the dimensions 2.5-12.5 mm ● For HSS, carbide, TiN-coated, concrete, tungsten and cobalt drills ● Interchangeable diamond wheel ● New drill attachment mechanism for easier, faster and safer grinding

Accessories Diamond wheel standard 180 Diamond wheel coarse 100

Price:SKr 1,300.00

Drill sharpener Drill Doctor The DD500X model is designed for durability and has the flexibilty required to sharpen the largest range and most popular sizes of dull or broken drill bits - including split points and masonry bits. Increase capacity with optional 19 mm chuck accessory, New "Push to Stop" design on the drill point splitting port will not allow you to over split the bit point. ● An easy way to get perfect sharpened drill bits ● Drill Doctor has been sold in over 3 million units - A well established drill grinding manufacturer ● Integrated fixture in the machine chuck ● Stable drill chuck holds each drill in exact right position during grinding ● With a few turn of the drill chuck, the drill get sharpened in perfect angle ● The diamond wheel is sufficient to hundreds of grindings ● User replaceable diamond griding wheel design for simple replacement ● Strong, impact-resistant and double insulated body

Drill doctor demostration video is found under the video tab

DD500X ● Sharpens 118° and 135° point angle ● Sharpens the dimensions 2.5-12.5 mm ● Creates split-point bits from standard bits ● For HSS, carbide, TiN-coated, concrete, mansonry and cobalt drill bits ● Longer jaws hold bit more precisely and jaw guides eliminate jaw twisting on small bits ● Quick change diamond wheel ● Hard carrying case is included

Accessories Chuck for drill bits 2.5-19 mm Diamond wheel standard 180 Diamond wheel coarse 100

Price:SKr 2,450.00

The attachment comprises a base (1), a knife holder (2), an extra Universal Support (3) with micro adjust (4) and two pairs of hollow pins (5 and 6) for the knife holder. The base is mounted on this extra Universal Support and on the existing Universal Support of the machine. The base is locked with the screw (7). An arm (8), which is locked with an adjustable hand lever (9), stabilizes the construction. The knife is placed on the pair of hollow pins on the knife holder. A magnet (13) keeps the knife in place. The holder has holes to fit various knife standards. Two pair of pins (Ø4 and Ø5 mm) come with the jig. The knife holder (2) glides on the base (1), which has PTFE surfaces to minimise the friction. The knives are ground on the face. Adjusting the nut on the horizontal Universal Support sets the grinding depth.

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 690.00

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 775.00

Gouge Jig For fingernail shaped bowl gouges and spindle gouges. Can be set to create the edge geometry of your choice. Also for exchangeable cutters of any shape.

Profiled Leather Honing Wheel For honing and polishing the flute on gouges. With two exchangeable profiles. One with a 3 mm radius and one with a 60° point.

Multi Jig For skew chisel with a straight or a curved edge. Can be set for any skew angle. Even for skews with oval section. Also for parting and beading tools and roughing gouges.

Machine cover For protecting the machine from shavings and wood dust.

Turning Tool Setter For instant setting of the geometries on gouges and skews when using the SVD-185 and the SVS-50 jigs. With built in edge geometries. Works on any stone diameter.

Woodturner's Instruction Box An 1 hour and 20 minutes comprehensive DVD made by Jeff Farris and a detailed handbook by Torgny Jansson shows how to best work with the Tormek TNT sharpening system.

Tool Rest For scrapers, hollowing tools and thin parting tools. Secure locking on the Universal Support thanks to the patented design.

TNT-708

+

HTK-705

+

SVH-320

+

SVP-80

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 1,270.00

Suitable for following sharpener Tormek T-3

Price:SKr 1,265.00

Suitable for following sharpener Tormek T-7

Price:SKr 1,885.00

Suitable for following sharpener Tormek T-7

Price:SKr 1,060.00

The Tormek Instruction box, which contains a 1 hour 20 minutes DVD film and a handbook shows you how to shape and sharpen all your turning tools. The film is made by Jeff Farris, a highly experienced American woodturning instructor and the handbook is written by Torgny Jansson, the inventor of the Tormek Sharpening System. In the film Jeff puts focus on the most important tools – which also are the most difficult to sharpen – the spindle gouge, the bowl gouge and the skew. You can watch him shape an edge to his favourite profile and see how quickly it is re-sharpened once the setting is done. The handbook clearly describes the whole system and its possibilities. Numerous line drawings show step by step how to shape and sharpen your tools. Repeatability is the core word and the book explains three efficient methods for how to best replicate an edge profile. The Instruction Box comes with the Woodturner’s Kit TNT-708 and can also be purchased separately. The kit contains all accessories you need to use the Tormek TNT sharpening system.

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 205.00

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 145.00

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 90.00

Gouge Jig SVD-185

Multi Jig SVS-50

Jig Setting JS

Protrusion P

Universal Support position A or B

Mount the tool in the jig with a fixed protrusion.

Set the distance of the Universal Support with the TTS-100.

Sharpen. The edge is now exactly replicated.

Bowl gouge.

Skew chisel.

• On a slow running grindstone, to remove steel you need to press harder than on a high-speed grinder. The same high grinding pressure on a high-speed grinder will cause overheating. So do not be afraid of pressing hard on the tool. Press with your fingers close to the edge.
• Move the tool sideways and use the whole width of the stone so you avoid grooving the stone. Lighten the pressure or lift the tool when moving to a new spot on the stone.
• When shaping a large bevel surface such as on a skew chisel with a straight edge, the low grinding pressure slows down the grinding. Re-activating the grinding stone a few times during the grinding with the Stone Grader SP-650 speeds up the work.
• If you need to change a shape considerably, e.g. when decreasing the edge angle, grind off the heel of the bevel on a high-speed grinder. Ensure that the tool does not get too hot and stop grinding before you reach the tip. Complete the shaping on the Tormek.

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 0.00

When new, impregnate the leather with light machine oil. This will soften the leather and cause the honing compound to penetrate the leather.

Apply a thin string of the honing compound before starting the machine. Rotate the wheel by hand.

Start the machine and distribute the compound by pressing a tool gently against the wheel. Let the compound penetrate the leather.

Always hone away from the edge!

If you hone towards the edge, it cuts into the wheel!

Suitable for following Sharpeners Tormek T-3 Tormek T-7

Price:SKr 35.00

LA-122. Set of standard spare discs. One with a 3 mm radius and one with a 60º tip.

LA-124. Set of optional, narrow discs. One with a 2 mm radius and one with a 45º tip.

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 0.00

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 100.00

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 120.00

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 380.00

With the Tormek patented attachment for drill bits DBS-22 you can now sharpen your drill bits with the highest precision. The optimal point and clearance angles can be set according to each drilling requirement, which depends upon the drill size and material. You can completely restore worn drills as well as broken drills to a perfect shape. You create a 4-facet point which gives the ideal cutting performance since the chisel edge gets a point instead of being almost flat as on many drills. A 4-facet point will not walk and the thrust force required is considerably reduced compared to a conventional cone point drill. A precision sharpened 4-facet point generates less heat and the life of the drill is therefore also prolonged. Independent tests show that a Tormek sharpened drill lasts up to 4 times longer than a brand new conventional drill bit¹. By working with the laws of physics and cooling the edge continuously, the risk that the steel becomes overheated and loses its hardness or gets micro cracks is eliminated. You have full control all the time and can see how the sharpening proceeds. ¹ Uddeholm Tooling AB, 2010. 15 mm deep holes were drilled in toughened steel with 6 mm drills. With rotation speed 1326 r.p.m and 0.15 mm feed per rotation, the Tormek sharpened drills lasted on average 327 holes while the new drills with an s-shaped point lasted 72 holes.

4-Facet point The chisel edge comes to a point and will not walk. Bores a round, straight hole with close tolerances.

Always the right clearance angle The optimal clearance angle can be set according to each drilling requirement to 7°, 9°, 11°or 14°.

Always equal cutting edges The two cutting edges are sharpened symmetrically and work in perfect unison which prolongs the life of the drill.

Sharpens all drill sizes One and the same drill holder copes with drills from 3 mm to 22 mm. No change of chuck required.

Sharpens all point angles It can be set at any angle between 90° and 150°.

DBS-22 tested in The Woodworker Read the full report: PDF The Woodworker

The Primary facets, P and the Secondary facets, S meet in the centre and form a point.

The drill is mounted in a Drill Holder (3) on a Guide (2), which in turn runs on a Base (1).

You start by sharpening the Primary facets. The grinding depth is determined by a setting screw, P.

The drill holder is moved forward to a second stop S for grinding the Secondary facets.

The Point angle can be set at any angle by turning the guide. Select the angle which is most suitable for the job…

…or first measure the existing point angle in the grooves on the Guide.

The Clearance angle is set by tilting the base…

…it can easily be set with the Setting Template.

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 1,470.00

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 270.00

This Tool Rest is ideal for the grinding of turning scrapers and special tools for woodcarving, e.g. large scorps and inshaves. Also for cabinet scrapers and hollowing tools. It has a generous surface, 90×110 mm, which permits a safe and steady positioning of the tool towards the stone. The bore is made with a special wedge shape, which increases the locking force by 250 %. You can lock the Tool Rest instantly at the chosen angle. This unique design is patented by Tormek.

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 150.00

The closed seat is for skew chisels. The tool is fixed with the side screw (4). The top screw (5) is not used.

The open seat is designed for tools which have the edge square across the shank. The tool is fixed with the top screw in the housing (5). As the seat can be turned, it can also be used for short skew chisels.

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 295.00

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 400.00

This patented jig was developed for short woodcarving tools, butt chisels and tools for power carvers. The jig has two parallel flanges running on both sides of the Universal Support. The technique achieved with this design ensures that at all times the jig – even when rotated – holds the tool square to the grindstone. This is a great advantage, as you can continuously concentrate on how the edge touches the grindstone or the honing wheel without having to worry whether the jig is square to the stone.

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 120.00

The jig comprises a clamp with a rubber lined, wedge shaped stop, which holds the axe in a fixed position towards the grindstone. The clamp works on the Universal Support, on which it slides across the stone. The jig is designed so that the rotation of the stone presses the axe firmly into the jig. You only need to hold and guide the axe with your hands. This jig only works with the stone running towards the edge. If necessary, the honing wheel can be removed to allow clearance for the axe handle.

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 65.00

The jig for scissors sharpening comprises a support plate (1) and a holder (2) with two clamps (3) for the scissors. Usually you use only the right clamp. For large scissors and garden shears you use both clamps. You adjust the clamp to fit the scissors’ thickness with the screw (4). You lock the scissors by tightening the knob (5). The support plate has a sliding surface, so the holder with the scissors can easily be moved while it is pressed onto the plate.

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 225.00

This jig is made especially for long and thin knives. It works in the same way as the SVM-45 jig but it is wider and therefore gives more support to long and thin blades. The jig comprises an adjustable clamp (1) for holding knives of any thickness and an adjustable stop (2). You adjust the jig to the knife thickness with the screw (3). You lock the tool by tightening the knob (4). The jig rests on the Universal Support. The exact edge angle is set by rotating the stop or with the Micro Adjust on the Universal Support. The Universal Support is placed vertically for grinding towards the edge.

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 230.00

The jig for knife sharpening comprises an adjustable clamp (1) for holding knives of any thickness and an adjustable stop (2). You adjust the jig to the knife thickness with the screw (3) and lock by tightening the knob (4). The jig rests on the Universal Support. The exact edge angle is set by rotating the stop or with the Micro Adjust on the Universal Support. The Universal Support is normally placed vertically for knife sharpening towards the edge. Short knives can also be ground away from the edge with the Universal Support placed horizontally.

Suitable for following sharpeners Tormek T-3 Tormek T-7

Price:SKr 165.00

The table is provided with three T-slots. The slices have been made as wide as possible, thus rendering the table very good stability. Parellelism = 0,03 mm. Pitch accuracy = 0,01 mm of 100 mm. The table is supplied with a handle for longitudinal feed fitted on either the left of right hand side to order.

Price:SKr 6,720.00