<![CDATA[Holding tools]]> http://www.industributiken.se/english/holding-tools.html Sat, 19 May 2012 11:02:30 +0000 Zend_Feed http://blogs.law.harvard.edu/tech/rss <![CDATA[NC-Drill chuck for left and right rotation]]> http://www.industributiken.se/english/nc-drill-chuck-for-left-and-right-rotation.html
Toolholder DIN 2080

 

Cone (SK)
d1
a
b
k
G
d2
d3
d4
L1
L2
L3
L4
L5
SK 30 / ISO 30
SK 40 / ISO 40 *
SK 50 / ISO 50
31.75
44.45
69.85
1,6
1,6
1,6
16,1
16,1
25,7
8
10
12
M12
M16
M24
50,0
63,0
97,5
-
21,1
-
17,2
25,0
39,2
68,4
93,4
126,8
16,2
22,5
35,3
-
7,0
-
-
82,0
-
24,0
32,0
47,0
* SK40 / ISO40: Corner Protection with Ring, with slot

Material Case hardened steel, tensile strength in the core min. 950 N/mm²
Execution Case hardened HRC 60 - 2 (HV 700 - 50), Depth of case 0,8 mm ± 0,2 mm, black-finish
Accuracy Cone angle AT 3 according DIN 2080
Surface roughness of cone max. 0,001 mm

NC-Drill chuck for left and right rotation DIN 2080

 

SKU
Cone (SK)
Capacity
A
D
301.15.08
301.15.13
SK 30 / ISO 30
SK 30 / ISO 30
0,5 - 8
1,0 - 13
60
90
36
50
401.15.08
401.15.13
401.15.16
SK 40 / ISO 40
SK 40 / ISO 40
SK 40 / ISO 40
0,5 - 8
1,0 - 13
3,0 - 16
62
84
89
36
50
57
501.15.13
501.15.16
SK 50 / ISO 50
SK 50 / ISO 50
1,0 - 13
3,0 - 16
86
91
50
57
Included: Wrench

Application For clamping drills, countersinks and reamers on milling machines and CNC machines.

Head system WTE. Built in one piece, which gives high precision.

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Grippex Large Bar Puller and Pick-Up unit]]> http://www.industributiken.se/english/grippex-ii-bar-puller.html

GRIPPEX Large Powerful coolant driven bar puller and pick-up unit


For various reasons, such a high costs or limited floor space in work shops, a small percentage of the CNC lathes are equipped with some kind of magazine-type bar feeder. In small-batch production, however, the machine spindle itself, in addition to its inserted guiding tube and Grippex, provides you with a simple and highly efficient bar feeder.

Grippex is the bar puller that makes your CNC lathe more effective right away!

 

  • Instant setup - gripping is secured without any adjustment within the whole gripping range
  • Compact and light - Adjacent turret tool positions need not be empty
  • Powerful - stands high pressure up to 20 bar
  • Grippex doesn’t need high pressure for pulling properly. It can work from 0,5 bar onward
  • Clamps very close to the chuck, allowing short overhang of the bar
  • Clamps hexagon bars without need for spindle orientation
  • Can also be used as a pick-up unit with robot jaws

 

Grippex approaches bar to be pulled Coolant ON for Grippex to clamp Chuck unclamp, turret moves back along Z-axis and stops exactly at programmed position Chuck clamp; coolant OFF. Grippex unclamp; turret retracts Begin machining new part


Gripping Range
A
B
C
D
L
Large 2-60 mm
Large 3-80 mm
Large 7-105 mm
64
83
110
83
102
129
89
94
108
68
68
68
71
71
71
* VDI 30 the length L and C are + 11.80 mm
* VDI 40 the length L and C are + 12.80 mm

Available Shanks
  • ø 25 mm, ø32 mm, ø 40 mm
  • VDI30, VDI40
   Available Gripping range
  • 2-60 mm
  • 3-80 mm
  • 7-105 mm (with separate replacement fingers)

Price:SKr 8,100.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Grippex Small Bar Puller and Pick-Up unit]]> http://www.industributiken.se/english/grippex-ii-small-bar-puller.html

GRIPPEX Small Powerful coolant driven bar puller and pick-up unit


For various reasons, such a high costs or limited floor space in work shops, a small percentage of the CNC lathes are equipped with some kind of magazine-type bar feeder. In small-batch production, however, the machine spindle itself, in addition to its inserted guiding tube and Grippex, provides you with a simple and highly efficient bar feeder.

Grippex is the bar puller that makes your CNC lathe more effective right away!

 

  • Instant setup - gripping is secured without any adjustment within the whole gripping range
  • Compact and light - Adjacent turret tool positions need not be empty
  • Powerful - stands high pressure up to 20 bar
  • Grippex doesn’t need high pressure for pulling properly. It can work from 0,5 bar onward
  • Clamps very close to the chuck, allowing short overhang of the bar
  • Clamps hexagon bars without need for spindle orientation
  • Can also be used as a pick-up unit with robot jaws

 

Grippex approaches bar to be pulled Coolant ON for Grippex to clamp Chuck unclamp, turret moves back along Z-axis and stops exactly at programmed position Chuck clamp; coolant OFF. Grippex unclamp; turret retracts Begin machining new part


Gripping Range
A
B
C
D
L
Small 2-52 mm
54
74
86
59
64




Available Shanks
  • ø 20 mm, ø 25 mm, ø 32 mm
  • VDI20, VDI30
   Available Gripping range
  • 2-52 mm

Price:SKr 7,600.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Collet chuck for ER Collets DIN 6499]]> http://www.industributiken.se/english/collet-chuck-for-er-collets-din-6501.html
Toolholder HSK-A DIN 69893-1 Form A
ISO 12164-1
HSK-A
d1
d2
d4
L1
L2
L4
L5
M
f1
f2
f3
b1
b2
b3
h2
32
40
50
63
80
100
24
30
38
48
60
75
26
34
42
53
67
85
16
20
25
32
40
50
3,2
4,0
5,0
6,3
8,0
10,0
5,0
6,0
7,5
10,0
12,0
15,0
3,0
3,5
4,5
6,0
8,0
10,0
M10x1
M12x1
M16x1
M18x1
M20x1,5
M24x1,5
20
20
26
26
26
29
35
35
42
42
42
45
16
16
18
18
18
20
7,05
8,05
10,54
12,54
16,04
20,02
7
9
12
16
18
20
9
11
14
18
20
25
9,5
12
15,5
20
25
31,5

Material Case hardened steel, tensile strength in the core min. 950 N/mm²
Execution Case hardened HRC 60 - 2 (HV 700 - 50), Depth of case 0,8 mm ± 0,2 mm, black-finish
Accuracy Cone angle AT 3 according DIN 2080
Surface roughness of cone max. 0,001 mm


Collet chuck for ER Collets DIN 6499 HSK-A

 

SKU
HSK-A
ER
Capacity
A
D
A32.02.10
A32.02.16
HSK-A 32
HSK-A 32
ER 16
ER 25
1-10
2-16
80
80
32
42
A40.02.10
A40.02.16
A40.02.20
HSK-A 40
HSK-A 40
HSK-A 40
ER 16
ER 25
ER 32
1-10
2-16
2-20
80
80
100
32
42
50
A50.02.10
A50.02.16
A50.02.20
HSK-A 50
HSK-A 50
HSK-A 50
ER 16
ER 25
ER 32
1-10
2-16
2-20
100
100
100
32
42
50
Included: Clamping nut
SKU
HSK-A
ER
Capacity
A
D
A63.02.10
A63.02.10.2
A63.02.16
A63.02.16.2
A63.02.20
A63.02.20.2
A63.02.26
A63.02.26.2
HSK-A 63
HSK-A 63
HSK-A 63
HSK-A 63
HSK-A 63
HSK-A 63
HSK-A 63
HSK-A 63
ER 16
ER 16
ER 25
ER 25
ER 32
ER 32
ER 40
ER 40
1-10
1-10
2-16
2-16
2-20
2-20
3-26
3-26
100
160
100
160
100
160
120
160
32
32
42
42
50
50
63
63
A80.02.20
A80.02.26
HSK-A 80
HSK-A 80
ER 32
ER40
2-20
3-26
100
120
50
63
A100.02.16
A100.02.20
A100.02.26
HSK-A 100
HSK-A 100
HSK-A 100
ER 25
ER 32
ER 40
2-16
2-20
3-26
100
100
120
42
50
63


Collet chuck for ER Collets DIN 6499 HSK-C

 

SKU
HSK-C
ER
Capacity
A
D
C32.02.10
HSK-C 32
ER 16
1-10
60
32
C40.02.10
C40.02.16
C40.02.20
HSK-C 40
HSK-C 40
HSK-C 40
ER 16
ER 25
ER 32
1-10
2-16
2-20
60
70
75
32
42
50
Included: Clamping nut
SKU
HSK-C
ER
Capacity
A
D
C50.02.10
C50.02.16
C50.02.20
C50.02.26
HSK-C 50
HSK-C 50
HSK-C 50
HSK-C 50
ER 16
ER 25
ER 32
ER 40
1-10
2-16
2-20
3-26
60
70
75
80
32
42
50
63
C63.02.16
C63.02.20
C63.02.26
HSK-C 63
HSK-C 63
HSK-C 63
ER 25
ER 32
ER 40
2-16
2-20
3-26
70
75
80
42
50
63


Collet chuck for ER Collets DIN 6499 HSK-E

 

SKU
HSK-E
ER
Cap
A
D
SW
E32.02.10
E32.02.16
HSK-E 32
HSK-E 32
ER 16
ER 25
1-10
2-16
60
80
32
42
22
27
E40.02.10
E40.02.16
HSK-E 40
HSK-E 40
ER 16
ER 25
1-10
2-16
60
70
32
42
22
27
Included: Clamping nut

The HSK-E toolholders comes balanced with G 2,5 20.0000 min-1
SKU
HSK-E
ER
Cap
A
D
SW
E50.02.10
E50.02.16
E50.02.20
E50.02.26
HSK-E 50
HSK-E 50
HSK-E 50
HSK-E 50
ER 16
ER 25
ER 32
ER 40
1-10
2-16
2-20
3-26
60
70
75
80
32
42
50
63
22
27
34
46
E63.02.20
E63.02.26
HSK-E 63
HSK-E 63
ER 32
ER 40
2-20
3-26
75
80
50
63
34
46


For clamping tools with cylindrical shank in ER collets according to DIN 6499.
Balance Standard
G 6,3 12000 min-1
Balancing Balancing of Eroglu tools pre-balanced on G 2,5 Click here for additional order
Accessories

ER16 collets
ER25 collets
ER32 collets

ER40 collets
Collets DIN6499
Collet set in box

Wrenches
Coolant tube

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Collet chuck DIN 6391 for OZ Collets DIN 6388]]> http://www.industributiken.se/english/collet-chuck-din-6391-for-oz-collets-din-6389.html
Toolholder HSK-A DIN 69893-1 Form A
ISO 12164-1
HSK-A
d1
d2
d4
L1
L2
L4
L5
M
f1
f2
f3
b1
b2
b3
h2
32
40
50
63
80
100
24
30
38
48
60
75
26
34
42
53
67
85
16
20
25
32
40
50
3,2
4,0
5,0
6,3
8,0
10,0
5,0
6,0
7,5
10,0
12,0
15,0
3,0
3,5
4,5
6,0
8,0
10,0
M10x1
M12x1
M16x1
M18x1
M20x1,5
M24x1,5
20
20
26
26
26
29
35
35
42
42
42
45
16
16
18
18
18
20
7,05
8,05
10,54
12,54
16,04
20,02
7
9
12
16
18
20
9
11
14
18
20
25
9,5
12
15,5
20
25
31,5

Material Case hardened steel, tensile strength in the core min. 950 N/mm²
Execution Case hardened HRC 60 - 2 (HV 700 - 50), Depth of case 0,8 mm ± 0,2 mm, black-finish
Accuracy Cone angle AT 3 according DIN 2080
Surface roughness of cone max. 0,001 mm


Collet chuck DIN 6391 for OZ Collets DIN 6388 HSK-A

 

SKU
HSK-A
OZ
Capacity
A
D
A50.01.16
A50.01.25
HSK-A 50
HSK-A 50
OZ 16
OZ 25
2-16
2-25
100
100
43
60
A63.01.16
A63.01.25
A63.01.32
HSK-A 63
HSK-A 63
HSK-A 63
OZ 16
OZ 25
OZ 32
2-16
2-25
3-32
100
100
120
43
60
72
A100.01.16
A100.01.25
A100.01.32
HSK-A 100
HSK-A 100
HSK-A 100
OZ 16
OZ 25
OZ 32
2-16
2-25
3-32
110
120
130
43
60
72
Included: Clamping nut

For clamping tools with cylindrical shank in OZ collets according to DIN 6388 form A and B.
Balance Standard
G 6,3 12000 min-1
Balancing Balancing of Eroglu tools pre-balanced on G 2,5 Click here for additional order
Accessories

OZ16 collets
OZ25 collets
OZ32 collets

Collet set in box
Wrenches 
Coolant tube

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Delivery unit for coolant]]> http://www.industributiken.se/english/delivery-unit-for-coolant.html
Delivery unit for coolant

 

SKU
HSK-A
D
d
L
A32.700
A40.700
A50.700
A63.700
A80.700
A100.700
HSK-A 32
HSK-A 40
HSK-A 50
HSK-A 63
HSK-A 80
HSK-A 100
M10 x 1
M12 x 1
M16 x 1
M18 x 1
M20 x 1.5
M24 x 1.5
6
8
10
12
14
16
26,0
29,5
33,0
34,5
40,0
44,0

For coolant supply through the centre of HSK toolholders.

Coolant tube with 2 sealing rings, angular movement according to DIN ±1°		 Accessories

Wrench 

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Wrench for delivery unit for coolant]]> http://www.industributiken.se/english/wrench-for-delivery-unit-for-coolant.html
Wrench for delivery unit for coolant

 

SKU
HSK-A
D
L
A32.701
A40.701
A50.701
A63.701
A80.701
A100.701
HSK-A 32
HSK-A 40
HSK-A 50
HSK-A 63
HSK-A 80
HSK-A 100
8,5
10,5
14,5
16,5
18,5
22,0
115
115
115
136
136
136

For mounting the coolant tubes om HSK toolholders. Suitable for following article  

Coolant tube

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Arnold Mechanical (high pressure)]]> http://www.industributiken.se/english/arnold-mechanical.html
High pressure Arnold Mechanical vices achieve a clamping force up to 8 tons using the simple turn of the handle without any effort. This advantage makes them ideal for heavy duty clamping in milling machines, drilling machines and threading machines.


  • 0.01 mm clamping repeatability
  • Monoblock design avoids deformation due to high pressure and great rigidity.
  • Large opening, up to 375 mm and 845 mm if the body is in two parts.
  • Clamping force is 2.5/4/5/8 tons according to size.
  • Fitted with high pressure mechanical intensifier.
  • The force applied by the high pressure spindle is transmitted to the work-piece in the exact centre of the clamping jaw.
  • Permanent clamping force avoids repositioning the work-piece one day to the next.
  • Ideal for long lasting machining.
  • Optional power regulator.
  • Up to seven different types of standard jaws.
 VERSIONS
1. Standard vice.
  • Standard shape highly valued for decades. Clamping to the machine table is carried out through the lengthwise orifices and slots of the vice.
  • Can be supplied with a rotary base.
 2. Straight vice.
  • The narrow figure enables one to be placed alongside the other, making up a large clamping unit for large work-pieces.
3. Two part straight vice.
  • Able to clamp any work-piece however large it is.
  • Clamps the work-pieces on top of the guides on or top of the table.
  • An inner tie-rod joins the two parts of the vice.

Dimensions

 

Size
090
125
160
200
Arnold Mechanical
010 200 090
010 200 125
010 200 160
010 200 200
Arnold Mechanical with regulator

010 210 125
010 210 160

Arnold Mechanical with base
010 201 090
010 201 125
010 201 160
010 201 200
Arnold Mechanical with base and regulator

010 211 125
010 211 160

Straight Arnold Mechanical 
010 202 090
010 202 125
010 202 160
010 202 200
Straight Arnold Mechanical with regulator

010 212 125
010 212 160

Two part Arnold Mechnical


010 203 160
010 203 200
Clamping force (kg)
A
B
C - Clamping field 1
C - Clamping field 2
D
E
F
F (Straight vice)
L
Vice weight (kg)
2.500
40
90
0-80
75-155
355
160
92
92
395 -550
13
4.000
40
125
0 - 105
100-205
425
195
107
150
485 - 690
26
5.000
50
160
0 - 155
150 - 305
570
250
130
150
570 - 875
51
8.000
63
200
0 - 210
165 - 375
680
300
160
150
720 - 1.100
94
Base
800 450 090
800 450 125
800 450 160
800 450 200
H
J
K
Base weight (kg)
220
230
25
5
264
270
28
8
325
325
32
15
400
400
45
32



 Set supplied
  ● base body
  ● mechanical spindle
  ● 1 set of plain jaws
  ● 1 handle
  ● 4 end clamps
  ● instruction manual


 100% force
The force applied by the high pressure spindle is transmitted to the work-piece in the exact centre of the clamping jaw.
Accessories and spare parts

Jaws
Extra spindle
Base

Adjustable stop

Price:SKr 12,600.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Arnold Hydraulic (high pressure)]]> http://www.industributiken.se/english/arnold-hydraulic-high-pressure.html
High pressure Arnold Hydraulic vices achieve a clamping force up to 8 tons using the simple turn of the handle without any effort. This advantage makes them ideal for heavy duty clamping in milling machines, drilling machines and threading machines.


  • 0.01 mm clamping repeatability
  • Monoblock design avoids deformation due to high pressure and great rigidity.
  • Large opening, up to 375 mm and 845 mm if the body is in two parts.
  • Clamping force is 2.5/4/5/8 tons according to size.
  • Fitted with high pressure hydraulic intensifier which does not require any external supply.
  • The force applied by the high pressure spindle is transmitted to the work-piece in the exact centre of the clamping jaw.
  • Permanent clamping force avoids repositioning the work-piece from one day to the next. This advantage makes it ideal for long term machining.
  • Optional power regulator.
  • Up to seven different types of standard jaws.
 VERSIONS
1. Standard vice.
  • Standard shape highly valued for decades. Clamping to the machine table is carried out through the lengthwise orifices and slots of the vice.
  • Can be supplied with a rotary base.
 2. Straight vice.
  • The narrow figure enables one to be placed alongside the other, making up a large clamping unit for large work-pieces.
3. Two part straight vice.
  • Able to clamp any work-piece however large it is.
  • Clamps the work-pieces on top of the guides on or top of the table.
  • An inner tie-rod joins the two parts of the vice.

Dimensions

 

Size
090
125
160
200
Arnold Hydraulic
010 010 090
010 010 125
010 010 160
010 010 200
Arnold Hydraulic with regulator

010 110 125
010 110 160
010 110 200
Arnold Hydraulic with base
010 011 090
010 011 125
010 011 160
010 011 200
Arnold Hydraulic with base and regulator

010 111 125
010 111 160
010 111 200
Straight Arnold Hydraulic 
010 012 090
010 012 125
010 012 160
010 012 200
Straight Arnold Hydraulic with regulator

010 112 125
010 112 160
010 112 200
Two part Arnold Hydraulic


010 013 160
010 013 200
Clamping force (kg)
A
B
C - Clamping field 1
C - Clamping field 2
D
E
F
F (Straight vice)
L
Vice weight (kg)
2.500
40
90
0-80
75-155
355
160
92
92
415 -570
13
4.000
40
125
0 - 105
100-205
425
195
107
112
480 - 685
26
5.000
50
160
0 - 155
150 - 305
570
250
130
139
565 - 870
51
8.000
63
200
0 - 210
165 - 375
680
300
160
164
720 - 1.095
94
Base
800 450 090
800 450 125
800 450 160
800 450 200
H
J
K
Base weight (kg)
220
230
25
5
264
270
28
8
325
325
32
15
400
400
45
32



 Set supplied
  ● base body
  ● hydraulic spindle
  ● 1 set of plain jaws
  ● 1 handle
  ● 4 end clamps
  ● instruction manual


 100% force
The force applied by the high pressure spindle is transmitted to the work-piece in the exact centre of the clamping jaw.
Accessories and spare parts

Jaws
Extra spindle
Base

Adjustable stop

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Röhm Revolving Tailstock Centre with extended live centre]]> http://www.industributiken.se/english/rohm-revolving-tailstock-centres-with-extended-live-centre.html
Tailstock Centre - tip angle 60° with extended live centre Type 600-20

 

SKU
MK*
A
mm
B
mm
D
mm
J
mm
K
mm
Concentricity
mm
Max speed
rpm
Weight
kg
Max
workpiece
weight kg
362080
362081
362082
362083
MT 2
MT 3
MT 4
MT 5
73
74
88.5
119
32
34
42
58
15
15
20
30
10
11
13
14
29
30
38
49
0.008
0.008
0.008
0.010
7000
7000
6300
4300
0.32
0.46
1.0
2.6
170
340
700
1400
*MK = Morsetaper

Type 600-20

Small casing diameter - no support, tool holder or lathe tool in the way.
Can be used for all type of lathe works and specially with work of working material that needs small head diameter.

● Point angle 60°
● Extended live centre compared to type 600
● Lightweight version with slim body
● Body and live centre are hardened
● Live centre through hardened, can be reground many times
● Precision roller bearings for high concentricity
● Maintenance-free, lubricated for life
● Special seal prevents ingress of dirt and coolant

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Röhm Revolving Tailstock Centre with small casing diameter]]> http://www.industributiken.se/english/rohm-revolving-tailstock-centres-with-small-casing-diameter.html
Tailstock Centre - tip angle 60° with small casing diameter Type 600

 

SKU
MK*
A
mm
B
mm
D
mm
K
mm
Concentricity
mm
Max speed
rpm
Weight
kg
Max
workpiece
weight kg
005336
005429
005469
005490
005547
MT 2
MT 3
MT 4
MT 5
MT 6
62
62
75.5
104
143
32
34
42
58
80
15
15
20
30
42
18
18
25
34
49
0.005
0.005
0.005
0.010
0.020
7000
7000
6300
4300
3000
0.3
0.4
1.0
2.6
7.1
200
400
800
1600
3500
*MK = Morsetaper

Type 600

Small casing diameter - no support, tool holder or lathe tool in the way.
Can be used for all type of lathe works and specially with work of working material that needs small head diameter.

● Point angle 60°
● Lightweight version with slim body
● Body and live centre are hardened
● Live centre through hardened, can be reground many times
● Precision roller bearings for high concentricity
● Maintenance-free, lubricated for life
● Special seal prevents ingress of dirt and coolant

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Röhm Revolving Tailstock Centre with standard design]]> http://www.industributiken.se/english/rohm-revolving-tailstock-centres-with-standard-design.html
Tailstock Centre - tip angle 60° with standard design, body hardened and ground Type 604 H

 

SKU
MK*
A
mm
B
mm
D
mm
K
mm
Concentricity
mm
Max speed
rpm
Weight
kg
Max
workpiece
weight kg
043400
043115
042776
042176
042843
043532
MT 1
MT 2
MT 3
MT 4
MT 5
MT 6
60.5
65
79.5
102.5
129
152
36
45
60
70
90
105
15
20
25
32
40
50
17
24
31
41
50.5
57.5
0.005
0.005
0.005
0.005
0.005
0.010
7000
7000
5000
3800
3000
2600
0.4
0.5
1.3
2.3
4.7
10.2
100
200
500
800
2000
3500
*MK = Morsetaper

Type 604 H

Body hardened and ground. For all types of lathes, equally suitable for rough turning and finish turning.

● Point angle 60°
● Body and live centre are hardened
● Live centre through hardened, can be reground many times
● Precision roller bearings for high concentricity
● Maintenance-free, lubricated for life
● Special seal prevents ingress of dirt and coolant

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Röhm Revolving Tailstock Centre with standard design and extended live centre]]> http://www.industributiken.se/english/rohm-revolving-tailstock-centres-with-standard-design-and-extended-live-centre.html
Tailstock Centre - tip angle 60° with standard design and extended live centre Type 604 HVL

 

SKU
MK*
A
mm
B
mm
D
mm
J
mm
K
mm
Concentricity
mm
Max speed
rpm
Weight
kg
Max
workpiece
weight kg
058669
058670
058671
058672
058673
MT 2
MT 3
MT 4
MT 5
MT 6
75
95.5
114.5
143.5
172.5
45
60
70
90
105
20
25
32
40
50
10
12
14
16
18
34
47
53
65
78
0.005
0.005
0.005
0.005
0.010
7000
5000
3800
3000
2600
0.5
1.3
2.3
4.8
10.2
140
400
500
1200
2500
*MK = Morsetaper

Type 604 HVL

Body hardened and ground. For all types of lathes, equally suitable for rough turning and finish turning. The extended tip makes it possible to bring down the support.

● Point angle 60°
● Extended live centre compared to type 604 H
● Body and live centre are hardened
● Live centre through hardened, can be reground many times
● Precision roller bearings for high concentricity
● Maintenance-free, lubricated for life
● Special seal prevents ingress of dirt and coolant

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Röhm Revolving Tailstock Centre with pressure display]]> http://www.industributiken.se/english/rohm-revolving-tailstock-centre-with-pressure-display.html
Tailstock Centres - tip angle 60° with pressure display Type 652 AC-VL

 

SKU
MK*
A
mm
B
mm
D
mm
O
mm
K
mm
Concentricity
mm
Weight
kg
Max
workpiece
weight kg
079920
079921
079922
079923
MT 3
MT 4
MT 5
MT 6
120
137.5
177.5
223
64
72
95
120
25
32
40
52
11
14
15
24
46.5
53
66
80
0.010
0.010
0.010
0.015
0.6
0.9
1.5
2.0
260
550
1100
2500
*MK = Morsetaper

Type 652 AC-VL

Whenever the clamping force has to be kept within certain limits, either to prevent deformation of the component or to ensure secure clamping with sufficient pressure.
- As a tailstock centre in conjunction with hydro-mechanical face drivers because the drive teeth have to dig into the component
- For components that expand significantly due to high machining heat
- For clamping long slender components to prevent lateral displacement
- For clamping heavy components where a controlled clamping force is required

● Point angle 60°
● The adjusting pressure (clamping force) is directly readable on the manometer sight glass in daN
● The live centre, which is supported by a disc-spring pack, has a long spring travel
● Short sturdy design with active longitudinal axis. Live centre through hardened and finish ground
● Maximum accuracy due to precision roller bearings
● With special seal against dirt and coolant ingress, maintenance-free due to lifetime lubrication

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Boring bar blank for the production of special tools]]> http://www.industributiken.se/english/boring-bar-blank-for-the-production-of-special-tools.html
Toolholder DIN 2080

 

Cone (SK)
d1
a
b
k
G
d2
d3
d4
L1
L2
L3
L4
L5
SK 30 / ISO 30
SK 40 / ISO 40 *
SK 50 / ISO 50
31.75
44.45
69.85
1,6
1,6
1,6
16,1
16,1
25,7
8
10
12
M12
M16
M24
50,0
63,0
97,5
-
21,1
-
17,2
25,0
39,2
68,4
93,4
126,8
16,2
22,5
35,3
-
7,0
-
-
82,0
-
24,0
32,0
47,0
* SK40 / ISO40: Corner Protection with Ring, with slot

Material Case hardened steel, tensile strength in the core min. 950 N/mm²
Execution Case hardened HRC 60 - 2 (HV 700 - 50), Depth of case 0,8 mm ± 0,2 mm, black-finish
Accuracy Cone angle AT 3 according DIN 2080
Surface roughness of cone max. 0,001 mm

Boring bar blank for the production of special tools DIN 2080

 

SKU
Cone (SK)
A
D
401.17.63
SK 40 / ISO 40
250
63
501.17.97
SK 50 / ISO 50
315
97

Version: Cone and flange hardened and grinded.
Soft body for later processing.

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Collet chuck with cylindric shaft]]> http://www.industributiken.se/english/collet-chuck-with-cylindric-shaft.html
Collet chuck with cylindric shaft Cylindric shaft ø

 

SKU
d1
ER
l1
L
D
G011 8x8x125 *
8
ER 8
125
141
12
G011 10x8x80 *
G011 10x8x120 *
10
10
ER 8
ER 8
80
120
96
136
12
12
G011 12x8x80 *
G011 12x8x125 *
G011 12x11x125 *
12
12
12
ER 8
ER 8
ER 11
80
125
125
96
141
144
12
12
16
G011 16x11x125 *
G011 16x11x150 *
16
16
ER 11
ER 11
125
150
144
169
16
16
G011 20x16x100
G011 20x16x140 *
G011 20x25x150 *
20
20
20
ER 16
ER 16
ER 25
100
140
150
128
163
195
28
22
35
G011 25x25x150 *
25
ER 25
150
186
35
G011 30x25x180
30
ER 25
180
208
35
G011 32x25x180 *
G011 32x32x60
32
32
ER 25
ER 32
180
60
208
100
35
50
G011 40x32x80
40
ER 32
80
120
50
* with mini-nut

For clamping toolings with cylindrical shaft. To be clamped in End-Mill Holders Weldon or Collet Chucks.

Material Alloyed case-hardened steel with a tensile strength of 800N/mm². Carbonized according to Vickers min. 630 HV (min. 56 HRC).
Accessories

ER8 collets
ER11 collets
ER16 collets

ER25 collets
ER32 collets

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[OZ32 Collet DIN 6388 (Form B) 467 E]]> http://www.industributiken.se/english/oz32-collet-din-6388-form-b-467-e.html
Collet DIN 6388 OZ 467 E

 

SKU
OZ
d
D
L
467 E-03
467 E-04
467 E-05
467 E-06
467 E-07
467 E-08
467 E-09
467 E-10
467 E-11
467 E-12
467 E-13
467 E-14
467 E-15
467 E-16
467 E-17
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
43,7
43,7
43,7
43,7
43,7
43,7
43,7
43,7
43,7
43,7
43,7
43,7
43,7
43,7
43,7
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
SKU
OZ
d
D
L
467 E-18
467 E-19
467 E-20
467 E-21
467 E-22
467 E-23
467 E-24
467 E-25
467 E-26
467 E-27
467 E-28
467 E-29
467 E-30
467 E-31
467 E-32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
OZ32
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
43,7
43,7
43,7
43,7
43,7
43,7
43,7
43,7
43,7
43,7
43,7
43,7
43,7
43,7
43,7
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60


Collet set in box

 

SKU Type
Collet Pcs
 Collets included
467 E-S 467 E
16
 5-6-7-8-10-12-14-16-18-20-22-24-25-28-30-32


Double slotted OZ32 collet. Precision manufactured with a run out of 0,010 mm (10 µm).

For mounting instructions, please look at the tab Additional Information

Range The collet clamping range is nominal size down to minus 0.5 mm, e.g Ø 5-4.5 mm.
Form B Coolant through flange.
Suitable for following OZ collet chucks:

BT
Form AD
BT
Form AD/B
DIN 2080
DIN 69871
Form AD
DIN 69871
Form AD/B
VDI 

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[OZ25 Collet DIN 6388 (Form B) 462 E]]> http://www.industributiken.se/english/oz25-collet-din-6388-form-b-462-e.html
Collet DIN 6388 OZ 462 E

 

SKU
OZ
d
D
L
462 E-02
462 E-03
462 E-04
462 E-05
462 E-06
462 E-07
462 E-08
462 E-09
462 E-10
462 E-11
462 E-12
462 E-13
OZ25
OZ25
OZ25
OZ25
OZ25
OZ25
OZ25
OZ25
OZ25
OZ25
OZ25
OZ25
2
3
4
5
6
7
8
9
10
11
12
13
35,05
35,05
35,05
35,05
35,05
35,05
35,05
35,05
35,05
35,05
35,05
35,05
52
52
52
52
52
52
52
52
52
52
52
52
SKU
OZ
d
D
L
462 E-14
462 E-15
462 E-16
462 E-17
462 E-18
462 E-19
462 E-20
462 E-21
462 E-22
462 E-23
463 E-24
463 E-25
OZ25
OZ25
OZ25
OZ25
OZ25
OZ25
OZ25
OZ25
OZ25
OZ25
OZ25
OZ25
14
15
16
17
18
19
20
21
22
23
24
25
35,05
35,05
35,05
35,05
35,05
35,05
35,05
35,05
35,05
35,05
35,05
35,05
52
52
52
52
52
52
52
52
52
52
52
52


Collet set in box

 

SKU Type
Collet Pcs
 Collets included
462 E-S 462 E
16
 4-5-6-7-8-9-10-11-12-13-14-16-18-20-22-24-25


Double slotted OZ25 collet. Precision manufactured with a run out of 0,006 mm (6 µm).

For mounting instructions, please look at the tab Additional Information

Range The collet clamping range is nominal size down to minus 0.5 mm, e.g Ø 5-4.5 mm.
Form B Coolant through flange.
Suitable for following OZ collet chucks:

BT
Form AD
BT
Form AD/B
DIN 2080
DIN 69871
Form AD
DIN 69871
Form AD/B
VDI 

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[OZ16 Collet DIN 6388 (Form B) 415 E]]> http://www.industributiken.se/english/oz16-collet-din-6388-form-b-415-e.html
Collet DIN 6388 OZ 415 E

 

SKU
OZ
d
D
L
415 E-02
415 E-03
415 E-04
415 E-05
415 E-06
415 E-07
415 E-08
415 E-09
OZ16
OZ16
OZ16
OZ16
OZ16
OZ16
OZ16
OZ16
2
3
4
5
6
7
8
9
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
40
40
40
40
40
40
40
40
SKU
OZ
d
D
L
415 E-10
415 E-11
415 E-12
415 E-13
415 E-14
415 E-15
415 E-16
OZ16
OZ16
OZ16
OZ16
OZ16
OZ16
OZ16
10
11
12
13
14
15
16
25,5
25,5
25,5
25,5
25,5
25,5
25,5
40
40
40
40
40
40
40


Collet set in box

 

SKU Type
Collet Pcs
 Collets included
415 E-S 415 E
15
 2-3-4-5-6-7-8-9-10-11-12-13-14-15-16


Double slotted OZ16 collet. Precision manufactured with a run out of 0,006 mm (6 µm).

For mounting instructions, please look at the tab Additional Information

Range The collet clamping range is nominal size down to minus 0.5 mm, e.g Ø 5-4.5 mm.
Form B Coolant through flange.
Suitable for following OZ collet chucks:

BT
Form AD
BT
Form AD/B
DIN 2080
DIN 69871
Form AD
DIN 69871
Form AD/B
VDI 

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[ER Collet DIN 6499 with square locking drive without length-adjustment]]> http://www.industributiken.se/english/er-collet-din-6499-with-square-locking-drive-without-length-adjustment.html
Collet DIN 6499 ER ER

 

SKU
ER
d
Vkt
L
ERGB.10.3527
ERGB.10.4030
ERGB.10.4534
ERGB.10.649
ERGB.10.755
ER16
ER16
ER16
ER16
ER16
3,5
4
4,5
6
7
2,7
3
3,4
4,9
5,5
27,5
27,5
27,5
27,5
27,5
ERGB.16.3527
ERGB.16.4030
ERGB.16.4534
ERGB.16.649
ERGB.16.755
ERGB.16.862
ERGB.16.97
ERGB.16.108
ERGB.16.119
ERGB.16.129
ER25
ER25
ER25
ER25
ER25
ER25
ER25
ER25
ER25
ER25
3,5
4
4,5
6
7
8
9
10
11
12
2,7
3
3,4
4,9
5,5
6,2
7
8
9
9
34
34
34
34
34
34
34
34
34
34
SKU
ER
d
Vkt
L
ERGB.20.4534
ERGB.20.649
ERGB.20.755
ERGB.20.862
ERGB.20.97
ERGB.20.108
ERGB.20.119
ERGB.20.129
ERGB.20.1411
ERGB.20.1612
ER32
ER32
ER32
ER32
ER32
ER32
ER32
ER32
ER32
ER32
4,5
6
7
8
9
10
11
12
14
16
3,4
4,9
5,5
6,2
7
8
9
9
11
12
40
40
40
40
40
40
40
40
40
40
ERGB.26.649
ERGB.26.755
ERGB.26.862
ERGB.26.97
ERGB.26.108
ERGB.26.119
ERGB.26.129
ERGB.26.1411
ERGB.26.1612
ERGB.26.18145
ERGB.26.2016
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
6
7
8
9
10
11
12
14
16
18
20
4,9
5,5
6,2
7
8
9
9
11
12
14,5
16
46
46
46
46
46
46
46
46
46
46
46


For mounting instructions, please look at the tab Additional Information Suitable for following ER collet chucks:

BT
Form AD
BT
Form AD/B
DIN 2080
DIN 69871
Form AD
DIN 69871
Form AD/B
VDI 

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[ER40 Collet DIN 6499 472 E ]]> http://www.industributiken.se/english/er40-collet-din-6499-472-e.html
Collet DIN 6499 ER 472 E ER 40

 

SKU
ER
d
D
L
472 E-01
472 E-02
472 E-03
472 E-04
472 E-05
472 E-06
472 E-07
472 E-08
472 E-09
472 E-10
472 E-11
472 E-12
472 E-13
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
1
2
3
4
5
6
7
8
9
10
11
12
13
41
41
41
41
41
41
41
41
41
41
41
41
41
46
46
46
46
46
46
46
46
46
46
46
46
46
SKU
ER
d
D
L
472 E-14
472 E-15
472 E-16
472 E-17
472 E-18
472 E-19
472 E-20
472 E-21
472 E-22
472 E-23
472 E-24
472 E-25
472 E-26
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
14
15
16
17
18
19
20
21
22
23
24
25
26
41
41
41
41
41
41
41
41
41
41
41
41
41
46
46
46
46
46
46
46
46
46
46
46
46
46


Collet set in box

 

SKU Type
Collet Pcs
 Collets included
472 E-S 472 E (ER40)
23
 4-5-6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26


Double slotted ER40 collet. Precision manufactured with a run out of 0,006 mm (6 µm) except for 472 E-26 (12 µm) .

For mounting instructions, please look at the tab Additional Information

Range The collet clamping range is nominal size down to minus 1 mm, e.g Ø 5-4 mm.
Suitable for following ER collet chucks:

BT
Form AD
BT
Form AD/B
DIN 2080
DIN 69871
Form AD
DIN 69871
Form AD/B
VDI 

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[ER32 Collet DIN 6499 470 E ]]> http://www.industributiken.se/english/er32-collet-din-6499-470-e.html
Collet DIN 6499 ER 470 E ER 32

 

SKU
ER
d
D
L
470 E-01
470 E-02
470 E-03
470 E-04
470 E-05
470 E-06
470 E-07
470 E-08
470 E-09
470 E-10
ER32
ER32
ER32
ER32
ER32
ER32
ER32
ER32
ER32
ER32
1
2
3
4
5
6
7
8
9
10
33
33
33
33
33
33
33
33
33
33
40
40
40
40
40
40
40
40
40
40
SKU
ER
d
D
L
470 E-11
470 E-12
470 E-13
470 E-14
470 E-15
470 E-16
470 E-17
470 E-18
470 E-19
470 E-20
ER32
ER32
ER32
ER32
ER32
ER32
ER32
ER32
ER32
ER32
11
12
13
14
15
16
17
18
19
20
33
33
33
33
33
33
33
33
33
33
40
40
40
40
40
40
40
40
40
40


Collet set in box

 

SKU Type
Collet Pcs
 Collets included
470 E-S 470 E (ER32)
18
 3-4-5-6-7-8-9-10-11-12-13-14-15-16-17-18-19-20


Double slotted ER32 collet. Precision manufactured
with a run out of 0,006 mm (6 µm).

For mounting instructions, please look at the tab Additional Information

Range The collet clamping range is nominal size down to minus 1 mm, e.g Ø 5-4 mm.
Suitable for following ER collet chucks:

BT
Form AD
BT
Form AD/B
DIN 2080
DIN 69871
Form AD
DIN 69871
Form AD/B
VDI 

Price:SKr 98.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[ER25 Collet DIN 6499 430 E ]]> http://www.industributiken.se/english/er25-collet-din-6499-430-e.html
Collet DIN 6499 ER 430 E ER 25

 

SKU
ER
d
D
L
430 E-01
430 E-02
430 E-03
430 E-04
430 E-05
430 E-06
430 E-07
430 E-08
ER25
ER25
ER25
ER25
ER25
ER25
ER25
ER25
1
2
3
4
5
6
7
8
26
26
26
26
26
26
26
26
34
34
34
34
34
34
34
34
SKU
ER
d
D
L
430 E-09
430 E-10
430 E-11
430 E-12
430 E-13
430 E-14
430 E-15
430 E-16
ER25
ER25
ER25
ER25
ER25
ER25
ER25
ER25
9
10
11
12
13
14
15
16
26
26
26
26
26
26
26
26
34
34
34
34
34
34
34
34


Collet set in box

 

SKU Type
Collet Pcs
 Collets included
430 E-S 430 E (ER25)
15
 2-3-4-5-6-7-8-9-10-11-12-13-14-15-16


Double slotted ER25 collet. Precision manufactured
with a run out of 0,006 mm (6 µm).

For mounting instructions, please look at the tab Additional Information

Range The collet clamping range is nominal size down to minus 1 mm, e.g Ø 5-4 mm.
Suitable for following ER collet chucks:

BT
Form AD
BT
Form AD/B
DIN 2080
DIN 69871
Form AD
DIN 69871
Form AD/B
VDI 

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[ER16 Collet DIN 6499 426 E ]]> http://www.industributiken.se/english/er16-collet-din-6499-426-e.html
Collet DIN 6499 ER 426 E ER 16

 

SKU
ER
d
D
L
426 E-01
426 E-02
426 E-03
426 E-04
426 E-05
ER16
ER16
ER16
ER16
ER16
1
2
3
4
5
17
17
17
17
17
27
27
27
27
27
SKU
ER
d
D
L
426 E-06
426 E-07
426 E-08
426 E-09
426 E-10
ER16
ER16
ER16
ER16
ER16
6
7
8
9
10
17
17
17
17
17
27
27
27
27
27


Collet set in box

 

SKU Type
Collet Pcs
 Collets included
426 E-S 426 E (ER16)
10
 1-2-3-4-5-6-7-8-9-10


Double slotted ER16 collet. Precision manufactured
with a run out of 0,006 mm (6 µm).

For mounting instructions, please look at the tab Additional Information

Range The collet clamping range is nominal size down to minus 1 mm, e.g Ø 5-4 mm.
Suitable for following ER collet chucks:

BT
Form AD
BT
Form AD/B
DIN 2080
DIN 69871
Form AD
DIN 69871
Form AD/B
VDI 

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[ER50 Collet DIN 6499 474 E]]> http://www.industributiken.se/english/er50-collet-din-6499-474-e.html
Collet DIN 6499 B ER 474 E ER 50

 

SKU
ER
d
D
L
G020 ER50x6
G020 ER50x8
G020 ER50x10
G020 ER50x12
G020 ER50x14
G020 ER50x16
G020 ER50x18
G020 ER50x20
ER50
ER50
ER50
ER50
ER50
ER50
ER50
ER50
6
8
10
12
14
16
18
20
52
52
52
52
52
52
52
52
60
60
60
60
60
60
60
60
SKU
ER
d
D
L
G020 ER50x22
G020 ER50x24
G020 ER50x26
G020 ER50x28
G020 ER50x30
G020 ER50x32
G020 ER50x34
ER50
ER50
ER50
ER50
ER50
ER50
ER50
22
24
26
28
30
32
34
52
52
52
52
52
52
52
60
60
60
60
60
60
60


For clamping cylindrical shafts, for collet chucks system Regofix DIN 6499

Alloyed case-hardened steel with a tensile strengh of 800N/mm². Carbonized (44+4 HRC), Grinded

You have to insert the collet inclined into the nut until it snaps in the excenter ring. The nut with the inserted collet is then to be screwed upon the collet chuck. Unscrewing the nut, the collet releases by itself.

Range The collet clamping range is nominal size down to minus 2 mm, e.g Ø 10-8 mm.

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[ER11 Collet DIN 6499 4008 E]]> http://www.industributiken.se/english/er11-collet-din-6499-4008e.html
Collet DIN 6499 B ER 4008 E ER 11

 

SKU
ER
d
D
L
G020 ER11x1
G020 ER11x1.5
G020 ER11x2
G020 ER11x2.5
G020 ER11x3
G020 ER11x3.5
G020 ER11x4
ER11
ER11
ER11
ER11
ER11
ER11
ER11
1
1.5
2
2.5
3
3.5
4
11.5
11.5
11.5
11.5
11.5
11.5
11.5
18
18
18
18
18
18
18
SKU
ER
d
D
L
G020 ER11x4.5
G020 ER11x5
G020 ER11x5.5
G020 ER11x6
G020 ER11x6.5
G020 ER11x7
ER11
ER11
ER11
ER11
ER11
ER11
4.5
5
5.5
6
6.5
7
11.5
11.5
11.5
11.5
11.5
11.5
18
18
18
18
18
18


For clamping cylindrical shafts, for collet chucks system Regofix DIN 6499

Alloyed case-hardened steel with a tensile strengh of 800N/mm². Carbonized (44+4 HRC), Grinded

You have to insert the collet inclined into the nut until it snaps in the excenter ring. The nut with the inserted collet is then to be screwed upon the collet chuck. Unscrewing the nut, the collet releases by itself.

Range The collet clamping range is nominal size down to minus 0.5 mm, e.g Ø 2-1.5 mm.

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[ER20 Collet DIN 6499 428 E]]> http://www.industributiken.se/english/er20-collet-din-6499-428e.html
Collet DIN 6499 B ER 428 E ER 20

 

SKU
ER
d
D
L
G020 ER20x2
G020 ER20x3
G020 ER20x4
G020 ER20x5
G020 ER20x6
G020 ER20x7
ER20
ER20
ER20
ER20
ER20
ER20
2
3
4
5
6
7
21
21
21
21
21
21
31
31
31
31
31
31
SKU
ER
d
D
L
G020 ER20x8
G020 ER20x9
G020 ER20x10
G020 ER20x11
G020 ER20x12
G020 ER20x13
ER20
ER20
ER20
ER20
ER20
ER20
8
9
10
11
12
13
21
21
21
21
21
21
31
31
31
31
31
31

Collet set in a stand

SKU Type
Collet Pcs
 Collets included
G020 ER20 Satz 428 E (ER20)
12
 2-3-4-5-6-7-8-9-10-11-12-13


For clamping cylindrical shafts, for collet chucks system Regofix DIN 6499

Alloyed case-hardened steel with a tensile strengh of 800N/mm². Carbonized (44+4 HRC), Grinded

You have to insert the collet inclined into the nut until it snaps in the excenter ring. The nut with the inserted collet is then to be screwed upon the collet chuck. Unscrewing the nut, the collet releases by itself.

Range The collet clamping range is nominal size down to minus 1 mm, e.g Ø 5-4 mm.

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[ER8 Collet DIN 6499]]> http://www.industributiken.se/english/er8-collet-din-6499.html
Collet DIN 6499 B ER ER 8

 

SKU
ER
d
D
L
G020 ER8x1
G020 ER8x1.5
G020 ER8x2
G020 ER8x2.5
G020 ER8x3
ER8
ER8
ER8
ER8
ER8
1
1.5
2
2.5
3
8.5
8.5
8.5
8.5
8.5
13.5
13.5
13.5
13.5
13.5
SKU
ER
d
D
L
G020 ER8x3.5
G020 ER8x4
G020 ER8x4.5
G020 ER8x5
ER8
ER8
ER8
ER8
3.5
4
4.5
5
8.5
8.5
8.5
8.5
13.5
13.5
13.5
13.5


For clamping cylindrical shafts, for collet chucks system Regofix DIN 6499

Alloyed case-hardened steel with a tensile strengh of 800N/mm². Carbonized (44+4 HRC), Grinded

You have to insert the collet inclined into the nut until it snaps in the excenter ring. The nut with the inserted collet is then to be screwed upon the collet chuck. Unscrewing the nut, the collet releases by itself.

Range The collet clamping range is nominal size down to minus 0.5 mm, e.g Ø 2-1.5 mm.

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Reduction arbor for end mills DIN 1835]]> http://www.industributiken.se/english/reduction-arbor-for-end-mills-din-1835.html
Reduction arbor for end mills DIN 1835 Cylindric shaft ø

 

SKU
D
d1
l
d2
L
G010 20x6
G010 20x8
G010 20x10
G010 20x12
20
20
20
20
6
8
10
12
25
27
30
35
25
28
35
42
75
77
80
85
G010 32x6
G010 32x8
G010 32x10
G010 32x12
G010 32x14
G010 32x16
G010 32x18
G010 32x20
G010 32x22
G010 32x25
32
32
32
32
32
32
32
32
32
32
6
8
10
12
14
16
18
20
22
25
30
30
35
35
35
40
40
40
40
71
25
28
35
42
42
48
48
52
52
63
90
90
95
95
95
100
100
100
100
131

For clamping cylindric shafts according DIN 1835

Delievery with With 1 clamping screw. dia 25mm with 2 clamping screws

Material Alloyed case-hardened steel with a tensile strength of 800N/mm². Carbonized according to Vickers min. 630 HV (min. 56 HRC). Shank, journal and contact surface are grinded.

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Milling Arbor tenon drive MT with thread DIN 6360]]> http://www.industributiken.se/english/milling-arbor-tenon-drive-mt-with-thread-din-6360.html
Milling Arbor tenon drive MT with thread DIN 6360 Morsetaper (MT)

 

SKU
MT
d1
A
l3
d2
L

G541 2x10
G541 2x16
G541 2x22
MT 2
MT 2
MT 2
10
16
22
43
43
43
16
30
40
20
28
36
123
137
147
M10
M10
M10
G541 3x13
G541 3x16
G541 3x22
G541 3x27
G541 3x32
MT 3
MT 3
MT 3
MT 3
MT 3
13
16
22
27
32
48
48
48
48
48
25
30
40
60
60
24
28
36
43
48
154
159
169
189
189
M12
M12
M12
M12
M12
G541 4x16
G541 4x22
G541 4x27
G541 4x32
G541 4x40
MT 4
MT 4
MT 4
MT 4
MT 4
16
22
27
32
40
55
55
55
55
55
30
40
60
60
60
22
36
43
48
56
187
197
217
217
217
M16
M16
M16
M16
M16
G541 5x16
G541 5x22
G541 5x27
G541 5x32
G541 5x40
G541 5x50
MT 5
MT 5
MT 5
MT 5
MT 5
MT 5
16
22
27
32
40
50
60
60
60
60
60
60
30
40
60
60
60
60
28
36
43
48
56
70
219
229
249
249
249
249
M20
M20
M20
M20
M20
M20
Included: Clamping screw DIN 6367 and feather key.

For mounting of milling cutters with tenon.

Tangs are ordered separately if needed.

Material Alloyed case-hardened steel with a tensile strength of 800 N/mm². 
Carbonized according to Vickers min. 630 HV (min 56 HRC). Shank, journal and contact surface are grinded.
Accessories 

Retaining screw
Tangs

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Combi shell mill holder MT with thread]]> http://www.industributiken.se/english/combi-shell-mill-holder-mt-with-thread.html
Combi shell mill holder MT with thread Morsetaper (MT)

 

SKU
MT
d1
A
l1
l5
d2

G540 2x13
G540 2x16
G540 2x22
MT 2
MT 2
MT 2
13
16
22
43
43
43
22
27
31
12
17
19
28
32
40
M10
M10
M10
G540 3x13
G540 3x16
G540 3x22
G540 3x27
G540 3x32
MT 3
MT 3
MT 3
MT 3
MT 3
13
16
22
27
32
48
48
48
48
48
22
27
31
33
38
12
17
19
21
24
28
32
40
48
58
M12
M12
M12
M12
M12
G540 4x16
G540 4x22
G540 4x27
G540 4x32
G540 4x40
MT 4
MT 4
MT 4
MT 4
MT 4
16
22
27
32
40
55
55
55
55
55
27
31
33
38
41
17
19
21
24
27
32
40
48
58
70
M16
M16
M16
M16
M16
G540 5x27
MT 5
27
75
33
21
48
M20
Included: Clamping screw DIN 6367, drive ring DIN 6366 and feather key.

For mounting of milling cutters with tenon drive or clutch drive.

Tangs are ordered separately if needed.

Material Alloyed case-hardened steel with a tensile strength of 800 N/mm². 
Carbonized according to Vickers min. 630 HV (min 56 HRC). Shank, journal and contact surface are grinded.
Accessories 

Wrenches
Clutch drive ring
Retaining screw

Tangs

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Collet chuck for ER Collets DIN 6499]]> http://www.industributiken.se/english/collet-chuck-for-er-collets-din-6500.html
Collet chuck for ER Collets DIN 6499 ER Morsetaper (MT)

 

SKU
MT
Capacity
A
L
D

G510 2x16
G510 2x25
MT 2
MT 2
ER16 1-10
ER25 2-16
45
65
109
130
32
42
M10
M10
G510 3x25
G510 3x32
MT 3
MT 3
ER25 2-16
ER32 2-20
56
70
137
151
42
50
M12
M12
G510 4x25
G510 4x32
G510 4x40
MT 4
MT 4
MT 4
ER25 2-16
ER32 2-20
ER40 3-26
63
65
95
165
168
198
42
50
63
M16
M16
M16
G510 5x40
G510 5x50
MT 5
MT 5
ER40 3-26
ER50 6-34
86
112
215
242
63
78
M20
M20
Included: Clamping nut DIN 6499

For clamping tools with cylindrical shank in ER collets according to DIN 6499.

Tangs are ordered separately if needed.

Material Alloyed case-hardened steel with a tensile strength of 800 N/mm². 
Carbonized according to Vickers min. 630 HV (min 56 HRC), thread outside-shank and inside-shank for collets grinded. Runout accuracy of outside-shank to inside-shank lmax. 0.005 mm.
Accessories 

ER16 collets
ER25 collets
ER32 collets

ER40 collets
Collets DIN6499
Collet set in box

Wrenches
Tangs

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Precision-Drill chuck with thread]]> http://www.industributiken.se/english/precision-drill-chuck-with-thread.html
Precision Drill chuck with thread Morsetaper (MT)

 

SKU
MT
Capacity
A
L1
D

G534 2x0.5-8
G534 2x1-13
MT 2
MT 2
0.5-8
1-13
76
105
79
111
36
50
M10
M10
G534 3x0.5-8
G534 3-13
G534 3-16
MT 3
MT 3
MT 3
0.5-8
1-13
3-16
76
105
110
79
111
121
36
50
57
M12
M12
M12
G534 4x1-13
G534 4x3-16
MT 4
MT 4
1-13
3-16
110
115
116
126
50
57
M16
M16
G534 5x1-13
G534 5x3-16
MT 5
MT 5
1-13
3-16
112
117
118
128
50
57
M20
M20

For clamping of toolings with cylindrical shafts

Permissible rotating speed:
Clamping range 0,5 - 8 mm max. 25.000 U/min
Clamping range 1 - 13 mm max. 20.000 U/min
Clamping range 3 - 16 mm max. 15.000 U/min
To fit these rotating speed.

Tangs are ordered separately if needed.

Material Alloyed case-hardened steel with a tensile strengh of min. 800 N/mm².
Shank, jacket, clamping jaw and other relevant pieces are hardened and grinded. A manual is attached to every Drill Chuck.
Accessories 

Tangs

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Tang to screw in]]> http://www.industributiken.se/english/tang-to-screw-in.html
Tang to screw in for Morsetaper

 

SKU
Morsetaper
Thread (G)
G052 MK1
G052 MK2
G052 MK3
G052 MK4
G052 MK5
MT 1
MT 2
MT 3
MT 4
MT 5
M6
M10
M12
M16
M20

To be screwed in toolholders with morsetaper and thread
fits morsetapers from Karl Hermann.

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Morse taper extension DIN 2187]]> http://www.industributiken.se/english/morse-taper-extension-din-2187.html
Morse taper extension DIN 2187 Form B Morsetaper (MT)

 

SKU
Outer
MT
Inner
MT
L
G564B 1x1
G564B 1x2
MT 1
MT 1
MT 1
MT 2
145
160
G564B 2x1
G564B 2x2
G564B 2x3
MT 2
MT 2
MT 2
MT 1
MT 2
MT 3
160
175
196
G564B 3x1
G564B 3x2
G564B 3x3
G564B 3x4
MT 3
MT 3
MT 3
MT 3
MT 1
MT 2
MT 3
MT 4
175
195
215
240
SKU
Outer
MT
Inner
MT
L
G564B 4x1
G564B 4x2
G564B 4x3
G564B 4x4
G564B 4x5
MT 4
MT 4
MT 4
MT 4
MT 4
MT 1
MT 2
MT 3
MT 4
MT 5
200
215
240
265
300
G564B 5x2
G564B 5x3
G564B 5x4
G564B 5x5
MT 5
MT 5
MT 5
MT 5
MT 2
MT 3
MT 4
MT 5
247
268
300
355

For tooling with morse taper and flat tang. Form B.

Material Totally hardened. Outside and Inside Morsetaper is grinded.

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Reduction arbor DIN 2185]]> http://www.industributiken.se/english/reduction-arbor-din-2185.html
Reduction arbor DIN 2185 FormB Morsetaper (MT)

 

SKU
Outer
MT
Inner
MT
G562B 1x0
MT 1
MT 0
G562B 2x1
MT 2
MT 1
G562B 3x1
G562B 3x2
MT 3
MT 3
MT 1
MT 2
G562B 4x1
G562B 4x2
G562B 4x3
MT 4
MT 4
MT 4
MT 1
MT 2
MT 3
SKU
Outer
MT
Inner
MT
G562B 5x1
G562B 5x2
G562B 5x3
G562B 5x4
MT 5
MT 5
MT 5
MT 5
MT 1
MT 2
MT 3
MT 4
G562B 6x3
G562B 6x4
G562B 6x5
MT 6
MT 6
MT 6
MT 3
MT 4
MT 5

For tooling with morse taper and flat tang. Form B.

Material Totally hardened. Outside and Inside Morsetaper is grinded.

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Drill chuck adaptor DIN 238]]> http://www.industributiken.se/english/drill-chuck-adaptor-din-240.html
Drill chuck adaptor  Morsetaper (MT)

 

SKU
MT
D
L
G531 10x0
G531 12x0
MT 0
MT 0
10
12
79
84
G531 6x1
G531 10x1
G531 12x1
G531 16x1
G531 18x1
MT 1
MT 1
MT 1
MT 1
MT 1
6
10
12
16
18
83
86
89
99
107
G531 6x2
G531 10x2
G531 12x2
G531 16x2
G531 18x2
G531 22x2
G531 24x2
MT 2
MT 2
MT 2
MT 2
MT 2
MT 2
MT 2
6
10
12
16
18
22
24
100
105
106
112
119
130
140
SKU
MT
D
L
G531 12x3
G531 16x3
G531 18x3
G531 22x3
G531 24x3
MT 3
MT 3
MT 3
MT 3
MT 3
12
16
18
22
24
106
134
140
147
157
G531 16x4
G531 18x4
G531 22x4
G531 24x4
MT 4
MT 4
MT 4
MT 4
16
18
22
24
163
169
176
186
G531 16x5
G531 18x5
G531 22x5
MT 5
MT 5
MT 5
16
18
22
195
202
210

For mounting drill chuck heads

Material Alloyed case-hardened steel with a tensile strength of 800 N/mm². 
Carbonized according to Vickers min. 630 HV (min 56 HRC) Morsetaper is grinded.

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Shrink chuck for mounting of solid carbide and HSS-cutters (Form AD/B)]]> http://www.industributiken.se/english/shrink-chuck-for-mounting-of-solid-carbide-and-hss-cutters-form-ad-b.html
Shrink chuck for mounting of solid carbide and HSS-cutters JIS B 6339 (MAS 403 BT) AD/B


 

SKU
SK
d
A
D1
D
406.25.03
406.25.03.120
406.25.03.160
406.25.04
406.25.04.120
406.25.04.160
406.25.05
406.25.05.120
406.25.05.160
406.25.06
406.25.06.120
406.25.06.160
406.25.08
406.25.08.120
406.25.08.160
406.25.10
406.25.10.120
406.25.10.160
406.25.12
406.25.12.120
406.25.12.160
406.25.14
406.25.14.120
406.25.14.160
406.25.16
406.25.16.120
406.25.16.160
406.25.18
406.25.18.120
406.25.18.160
406.25.20
406.25.20.120
406.25.20.160
406.25.25
406.25.25.120
406.25.25.160
406.25.32
406.25.32.120
406.25.32.160
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
3
3
3
4
4
4
5
5
5
6
6
6
8
8
8
10
10
10
12
12
12
14
14
14
16
16
16
18
18
18
20
20
20
25
25
25
32
32
32
90
120
160
90
120
160
90
120
160
90
120
160
90
120
160
90
120
160
90
120
160
90
120
160
90
120
160
90
120
160
90
120
160
100
120
160
100
120
160
10
10
10
15
15
15
15
15
15
20
20
20
20
20
20
24
24
24
24
24
24
27
27
27
27
27
27
33
33
33
33
33
33
44
44
44
44
44
44
20
20
20
25
22
22
25
22
22
27
27
27
27
27
27
31
31
31
31
31
31
34
34
34
34
34
34
40
40
40
40
40
40
53
53
53
53
53
53
SKU
SK
d
A
D1
D
506.25.03
506.25.03.120
506.25.03.160
506.25.04
506.25.04.120
506.25.04.160
506.25.05
506.25.05.120
506.25.05.160
506.25.06
506.25.06.120
506.25.06.160
506.25.08
506.25.08.120
506.25.08.160
506.25.10
506.25.10.120
506.25.10.160
506.25.12
506.25.12.120
506.25.12.160
506.25.14
506.25.14.120
506.25.14.160
506.25.16
506.25.16.120
506.25.16.160
506.25.18
506.25.18.120
506.25.18.160
506.25.20
506.25.20.120
506.25.20.160
506.25.25
506.25.25.120
506.25.25.160
506.25.32
506.25.32.120
506.25.32.160
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
3
3
3
4
4
4
5
5
5
6
6
6
8
8
8
10
10
10
12
12
12
14
14
14
16
16
16
18
18
18
20
20
20
25
25
25
32
32
32
100
120
160
100
120
160
100
120
160
100
120
160
100
120
160
100
120
160
100
120
160
100
120
160
100
120
160
100
120
160
100
120
160
110
120
160
110
120
160
10
10
10
15
15
15
15
15
15
20
20
20
20
20
20
24
24
24
24
24
24
27
27
27
27
27
27
33
33
33
33
33
33
44
44
44
44
44
44
20
20
20
25
22
22
25
22
22
27
27
27
27
27
27
31
31
31
31
31
31
34
34
34
34
34
34
40
40
40
40
40
40
53
53
53
53
53
53

For technical description, please look at the tab Additional Information
Balance Standard
G 6,3 15000 min-1
Balancing Balancing of Eroglu tools pre-balanced on G 2,5 Click here for additional order
Accessories

Shrink fit
extensions
Pull studs

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Shrink fit extension]]> http://www.industributiken.se/english/shrink-fit-extension.html
Shrink fit extension


 

SKU
D
d1
d2
A
L1
L2
L3
M
120.25.12.03
120.25.12.04
12
12
3
4
8
8
150
150
-
-
-
-
12
16
-
-
120.25.16.03
120.25.16.04
120.25.16.05
120.25.16.06
16
16
16
16
3
4
5
6
10
10
10
10
150
150
150
150
-
-
-
36
-
-
-
10
12
16
20
26
-
-
-
M5
120.25.20.03
120.25.20.04
120.25.20.05
120.25.20.06
120.25.20.08
120.25.20.10
120.25.20.12
20
20
20
20
20
20
20
3
4
5
6
8
10
12
10
10
10
10
12
14
16
150
150
150
150
150
150
150
-
-
-
36
36
42
47
-
-
-
10
10
10
10
12
16
20
26
26
32
37
-
-
-
M5
M6
M6
M10
SKU
D
d1
d2
A
L1
L2
L3
M
120.25.25.08
120.25.25.10
120.25.25.12
120.25.25.14
120.25.25.16
25
25
25
25
25
8
10
12
14
16
20
20
20
20
22
150
150
150
150
150
36
42
47
47
50
10
10
10
10
10
26
32
37
37
40
M6
M6
M10
M10
M10
120.25.32.10
120.25.32.12
120.25.32.14
120.25.32.16
120.25.32.18
120.25.32.20
32
32
32
32
32
32
10
12
14
16
18
20
24
24
27
27
27
27
150
150
150
150
150
150
42
47
47
50
50
52
10
10
10
10
10
10
32
37
37
40
40
42
M6
M10
M10
M10
M10
M10

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Precision Milling Chuck (Form AD)]]> http://www.industributiken.se/english/precision-milling-chuck-form-ad.html
Precision Milling Chuck JIS B 6339 (MAS 403 BT) AD

 

SKU
SK
Capacity
d
A
D
405.03.20
405.03.32
BT 40
BT 40
EKS 20 6-20
EKS 32 6-32
20
32
75
90
48
68
505.03.20
505.03.32
BT 50
BT 50
EKS 20 6-20
EKS 32 6-32
20
32
90
95
48
68

For technical description, please look at the tab Additional Information


Precision Milling Chuck set in box

 

SKU
Capacity
Collet Pcs
 Collets included
405.63.20
405.63.32
EKS BT 40 6-20
EKS BT 40 6-32
5
7
 EKS 20 - 6, 8, 10, 12, 16 
EKS 32 - 6, 8, 10, 12, 16, 20, 25
505.63.20
505.63.32
EKS BT 50 6-20
EKS BT 50 6-32
5
7
 EKS 20 - 6, 8, 10, 12, 16 
EKS 32 - 6, 8, 10, 12, 16, 20, 25
Included: Precision milling chuck with collets and wrench
Balance Standard
G 6,3 12000 min-1
Balancing Balancing of Eroglu tools pre-balanced on G 2,5 Click here for additional order
Accessories

Collets EKS
Pull studs

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Adjustable tool holder (Form AD/B)]]> http://www.industributiken.se/english/adjustable-tool-holder-form-ad-b.html
Adjustable tool holder Micro-Mec ARF JIS B 6339 (MAS 403 BT) AD/B

 

SKU
SK
Capacity
d
A
D
SW
406.02.16.ARF
406.02.20.ARF
406.02.26.ARF
BT 40
BT 40
BT 40
ER25 2-16
ER32 2-20
ER40 3-26
42
50
63
90
100
105
50
50
60
4
4
4
506.02.20.ARF
506.02.26.ARF
BT 50
BT 50
ER32 2-20
ER40 3-26
50
63
110
115
50
60
4
4
Included: Clamping nut
Balance Standard
G 6,3 12000 min-1
Balancing Balancing of Eroglu tools pre-balanced on G 2,5 Click here for additional order
Accessories

ER25 collets
ER32 collets
ER40 collets

Collets DIN6499
Collet set in box
Wrenches

Pull studs

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Hydraulic expansion chuck (Form AD/B)]]> http://www.industributiken.se/english/hydraulic-expansion-chuck-form-ad-b.html
Hydraulic expansion chuck JIS B 6339 (MAS 403 BT) AD/B


 

SKU
SK
d
A
d1
D
406.65.06
406.65.08
406.65.10
406.65.12
406.65.14
406.65.16
406.65.18
406.65.20
406.65.25
406.65.32
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
BT 40
6
8
10
12
14
16
18
20
25
32
90
90
90
90
90
90
90
90
90
90
26
28
30
32
34
38
40
42
55
64
49,5
49,5
49,5
49,5
49,5
49,5
49,5
49,5
52
62
SKU
SK
d
A
d1
D
506.65.06
506.65.08
506.65.10
506.65.12
506.65.14
506.65.16
506.65.18
506.65.20
506.65.25
506.65.32
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
BT 50
6
8
10
12
14
16
18
20
25
32
110
110
110
110
110
110
110
110
110
115
26
28
30
32
34
38
40
42
55
63
49,5
49,5
49,5
49,5
49,5
49,5
49,5
49,5
60
70
Included: Wrench

● Maximum revolution 40000 rpm (observe the rpm limits of the interface, balancing recommended!)
● Range of adjustment of length 10 mm
● Maximum coolant pressure 80 bar
● Flexible due to use of reducing sleeves

Application: For drilling, reaming and milling
Balance Standard
G 6,3 15000 min-1
Balancing Balancing of Eroglu tools pre-balanced on G 2,5 Click here for additional order
Accessories

Reducing arbors
Pull studs

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Test arbor (Form A)]]> http://www.industributiken.se/english/test-arbor-form-a.html
Test arbor JIS B 6339 (MAS 403 BT) A

 

SKU
SK
A
D
305.18.32
BT 30
200
32
405.18.40
BT 40
300
40
505.18.50
BT 50
300
50

Included: Wooden Box with certificate.

For acceptance test of machine tools
in accordance with ISO-recommendation R 230.
 Accessories

Pull studs

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Boring bar blank for the production of special tools (Form A)]]> http://www.industributiken.se/english/boring-bar-blank-for-the-production-of-special-tools-form-a.html
Boring bar blank for the production of special tools JIS B 6339 (MAS 403 BT) A

 

SKU
SK
A
D
405.17.63
BT 40
250
63
505.17.97
BT 50
315
97

Cone and flange hardened and grinded.
Soft body for later processing.
 Accessories

Pull studs

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Quick-change tapping chuck without length compensation]]> http://www.industributiken.se/english/quick-change-tapping-chuck-without-length-compensation.html
 Quick-change tapping chuck without length compensation DIN 69880

 

SKU
d1
Capacity
A
D
d
209.16.12.1
20
M3 / M14
55
38
19
259.16.12.1
25
M3 / M14
55
38
19
309.16.12.1
309.16.20.1
30
30
M3 / M14
M5 / M22
55
77
38
54
19
31
SKU
d1
Capacity
A
D
d
409.16.12.1
409.16.20.1
40
40
M3 / M14
M5 / M22
55
77
38
54
19
31
509.16.12.1
509.16.20.1
509.16.36.1
50
50
50
M3 / M14
M5 / M22
M14 / M36
55
77
108
38
54
78
19
31
48

For the chucking of Quick change taps for threading taps.

On machining centres with synchronised spindles.
 Accessories

M3-M14
Tapping collets
with clutch 
M3-M14
Tapping collets
without clutch
M5-M22
Tapping collets
with clutch

M5-M22
Tapping collets
without clutch
M14-M36
Tapping collets
with clutch
M14-M36
Tapping collets
without clutch

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Quick-change tapping chuck with length compensation]]> http://www.industributiken.se/english/quick-change-tapping-chuck-with-length-compensation-1.html
 Quick-change tapping chuck with length compensation DIN 69880

 

SKU
d1
Capacity
A
D
d
C
T
209.16.12
20
M3 / M14
57
38
19
7
7
259.16.12
25
M3 / M14
58
38
19
7
7
309.16.12
309.16.20
30
30
M3 / M14
M5 / M22
62
84
38
54
19
31
7
12
7
12
SKU
d1
Capacity
A
D
d
C
T
409.16.12
409.16.20
40
40
M3 / M14
M5 / M22
62
84
38
54
19
31
7
12
7
12
509.16.12
509.16.20
509.16.36
50
50
50
M3 / M14
M5 / M22
M14 / M36
70
92
108
38
54
78
19
31
48
7
12
17.5
7
12
17.5

For the chucking of Quick change taps for threading taps.

Version: With ball retainer		 Accessories

M3-M14
Tapping collets
with clutch 
M3-M14
Tapping collets
without clutch
M5-M22
Tapping collets
with clutch

M5-M22
Tapping collets
without clutch
M14-M36
Tapping collets
with clutch
M14-M36
Tapping collets
without clutch

Price:SKr 0.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Quick-change tapping chuck without length compensation (Form A)]]> http://www.industributiken.se/english/quick-change-tapping-chuck-without-length-compensation-form-a.html
Quick-change tapping chuck without length compensation JIS B 6339 (MAS 403 BT) A

 

SKU
SK
Capacity
d
A
D
305.16.12.1
305.16.20.1
BT 30
BT 30
M3-M14
M5-M22
19
31
66
80
38
54
405.16.12.1
405.16.20.1
405.16.36.1
BT 40
BT 40
BT 40
M3-M14
M5-M22
M14-M36
19
31
48
65
93
126
38
54
78
505.16.12.1
505.16.20.1
505.16.36.1
BT 50
BT 50
BT 50
M3-M14
M5-M22
M14-M36
19
31
48
80
100
142
38
54
78

For the chucking of quick change adaptors for taps.

Note: For machining centres with synchronous spindle. 
Balance Standard
G 6,3 12000 min-1
Balancing Balancing of Eroglu tools pre-balanced on G 2,5 Click here for additional order
Accessories

M3-M14
Tapping collets
with clutch 
M3-M14
Tapping collets
witout clutch
M5-M22
Tapping collets
with clutch

M5-M22
Tapping collets
without clutch
M14-M36
Tapping collets
with clutch
M14-M36
Tapping collets
without clutch

Pull studs

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[Quick-change tapping chuck with length compensation (Form A)]]> http://www.industributiken.se/english/quick-change-tapping-chuck-with-length-compensation-form-a.html
Quick-change tapping chuck with length compensation JIS B 6339 (MAS 403 BT) A

 

SKU
SK
Capacity
d
A
D
C
T
305.16.12
305.16.20
BT 30
BT 30
M3-M14
M5-M22
19
31
64
95
38
54
7
12
7
12
405.16.12
405.16.20
405.16.36
BT 40
BT 40
BT 40
M3-M14
M5-M22
M14-M36
19
31
48
67
93
136
38
54
78
7
12
20
7
12
20
505.16.12
505.16.20
505.16.36
BT 50
BT 50
BT 50
M3-M14
M5-M22
M14-M36
19
31
48
82
100
142
38
54
78
7
12
17,5
7
12
17,5

For the chucking of quick change adaptors for taps.

Version: With ball retainer

Note: For machining centres without synchronous spindle. 
Balance Standard
G 6,3 12000 min-1
Balancing Balancing of Eroglu tools pre-balanced on G 2,5 Click here for additional order
Accessories

M3-M14
Tapping collets
with clutch 
M3-M14
Tapping collets
witout clutch
M5-M22
Tapping collets
with clutch

M5-M22
Tapping collets
without clutch
M14-M36
Tapping collets
with clutch
M14-M36
Tapping collets
without clutch

Pull studs

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[NC-Drill chuck for left and right rotation (Form AD/B)]]> http://www.industributiken.se/english/nc-drill-chuck-for-left-and-right-rotation-form-ad-b.html
NC-Drill chuck for left and right rotation JIS B 6339 (MAS 403 BT) AD/B

 

SKU
SK
Capacity
A
D
406.15.13
406.15.16
BT 40
BT 40
1,0 - 13
3,0 - 16
98
103
50
57
Included: Wrench

For clamping drills, countersinks and reamers on milling machines and CNC machines.

Head system WTE.
Balance Standard
G 6,3 12000 min-1
Balancing Balancing of Eroglu tools pre-balanced on G 2,5 Click here for additional order
Accessories

Pull studs

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000 <![CDATA[NC-Drill chuck for left and right rotation (Form A)]]> http://www.industributiken.se/english/nc-drill-chuck-for-left-and-right-rotation-form-a.html
NC-Drill chuck for left and right rotation JIS B 6339 (MAS 403 BT) A

 

SKU
SK
Capacity
A
D
305.15.08
305.15.13
BT 30
BT 30
0,5 - 8
1,0 - 13
73
100
36
50
405.15.08
405.15.13
405.15.16
BT 40
BT 40
BT 40
0,5 - 8
1,0 - 13
3,0 - 16
78
98
103
36
50
57
505.15.13
505.15.16
BT 50
BT 50
1,0 - 13
3,0 - 16
110
115
50
57
Included: Wrench

For clamping drills, countersinks and reamers on milling machines and CNC machines.

Head system WTE.
Balance Standard
G 6,3 12000 min-1
Balancing Balancing of Eroglu tools pre-balanced on G 2,5 Click here for additional order
Accessories

Pull studs

Price:SKr 225.00

]]> Sat, 19 May 2012 11:02:30 +0000