Industributiken Scandinavia AB

Skip to Main Content »

Search Site
Welcome Guest!

You're currently on:

Pullex Crocodile Bar Puller

Double click on above image to view full picture

Zoom Out
Zoom In

Pullex Crocodile Bar Puller

MPC Automation
Manufacturer: MPC Automation
Country: Sweden
Delivery time: In stock - Delivery normally same working day if it ordered before 12.00 noon
Brochure: crocodile-e.pdf  fixingplates.pdf

Quick Overview

Pullex Crocodile Bar Puller is developed to save seconds. It is directly fitted on the Part-Off tool shank.

Don't you want to this in almost no time? ... by using a bar puller that is directly fitted on the Part-off tool shank and pulls the bar into it's new cutting position simultaneosuly with the tool's retraction for ATC.




 You can't possibly get the work done faster than by using this revolutationary Bar Puller which forms a single unit together with the part-off tool shank:

  • it clamps the bar instantaneously after cut-off and spindle stop
  • it pulls the bar into its new position simultaneously with the tool's retraction for automatic tool change.

Pullex Crodile feeds the bar within 1.5-2 seconds, to be compared with the job of a conventional shortbar Feeder, which would take 10-15 seconds to execute the same operation. Then, asuming a machining cycle time of 50 seconds for your workpiece, you'll find that:

  • you are going to save one day each week using Pullex Crocodile
  • this is a most profitable accessory for your CNC-lathe.



The fixing plate is fitted between the tool holder and the upper side of the part off square tool. The frame is fitted to the fixing plate.



The fixing plate fits different sizes and brands of tool holders and is screwed on the tool holder. The frame is fitted to the fixing plate.



Adjustment of pulling plates

The pulling plates are pushed within the grooves (in the direction for the arrows) into the desired diameter within the Frame's range of 30 mm. Adjust the pulling plates to a diameter of 0,1 mm to 0,2 mm less than the bar diameter. The pulling plates are hardened and profile ground for best performance.


After cut-off, the spindle is stopped and Pullex Crocodile advances a little (see "A") behind the bar centre for gripping the bar.


Operating cycle


- Cut off  

- After cut-off the spindle is stopped   

- Pullex advances a little behind the bar centre for gripping the bar   

- The chuck jaws are unclampled and the bar is pulled out into the new cutting position

In detail


Pullex Crocodile System comes with the following three parts

  • 1 x Frame (C30 or C60)
  • 1 x Fixing Plate (Shank or Blade type)
  • 1 set Pulling Plates (PFD-1)
C30 - 1-30 mm
C60 - 30-60 mm


How to select the right fixing plate for Pullex Crocodile.


Square shank part-off tool

1. When you have a shank part-off tool to be mounted on a tool holder you shall use the fixing plates with a flange together with the part-off tool in the tool holder.

C302 (Suitable for C30)
C602 (Suitable for C60)

2. When you have a square shank part-off tool and there is no space for the flange, you should use the fixing plate without a flange. This is a frequent occurrence when mounting the square shank part-off tool directly on the turret.

C303 (Suitable for C30)
C603 (Suitable for C60)


Blade part-off tool


1. Employ the following fixing plates if you use any of the following tool holders:

  a) - Iscar tool holder (for blade 26/21,4)

- Sandvik tool holder (blade 25,9/21,4)
type SGTBU-20-5G
type SGTBU-25-5G
type 151.2.202021M
  b) - Iscar tool holder (for blade 32/24,8)

type SGTBU-20-6G
type SGTBU-20C-6
type SGTBU-25-6G
type SGTBU-25C-6
  c) - Iscar tool holder (for blade 32/24,8)

-Sandvik tool holder (for blade 31,9/25)
-Mircona tool holder (for blade 32/25)

type SGTBU-32-6G
type SGTBU-32-25-6G
type 151.2.3232-25
type TB56C-25-32
type TB56C-32-32

For other tool holders in blade style, choose any of the following fixing plates:


  a) - Tool holder for blade ~26/21,4

  b) - Tool holder for blade ~32/25

Pulling plates


Pulling plates must be ordered separately.
They come in sets of 2 pcs.


When you order: Typical Pullex Crocodile System consist of  1 x Frame, 1 x Fixing Plate and 1 set Pulling Plates

Other people marked this product with these tags:
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.

Art.Nr.Product Name Price Qty
PFD-1 Pulling Plates, 1 set
SKr 400.00
Add Items to Cart

Related Products

Check items to add to the cart or select all

    Pulling Plates, 1 set
    Pulling Plates, 1 set
    SKr 400.00

You may also be interested in the following product(s)

Grippex Large Bar Puller and Pick-Up unit

Grippex Large Bar Puller and Pick-Up unit
Starting at: SKr 11,100.00

Grippex Small Bar Puller and Pick-Up unit

Grippex Small Bar Puller and Pick-Up unit
Starting at: SKr 10,300.00

My Cart

You have no items in your shopping cart.

You can also order through
our customer service
+46 (0)8 122 094 20
+46 (0)8 122 094 30
Office hours:
Mon-Fri 8.30 - 17.00 CET


New! The freight cost within Sweden is now only 80 SEK per order Read more