Industributiken Scandinavia AB

Skip to Main Content »

Search Site
Welcome Guest!

You're currently on:

Truing Tool

Double click on above image to view full picture

Zoom Out
Zoom In

Truing Tool

Tormek
Manufacturer: Tormek
Country: Sweden
Delivery time: In stock - Delivery normally same working day if it ordered before 12.00 noon
Brochure: tt50-en.pdf  tt50-leaflet-en.pdf

Quick Overview

Truing Tool

Trues the grindstone exactly round and flat. Guided by the Universal Support, which also guides the jigs. Screw feed with dual knobs for smooth feed across the stone. The cutting depth can be set within 0,25 mm.

With this unique tool, Tormek TT-50, you can true and dress your grindstone exactly round and flat. It mounts and locks instantly on the Tormek Universal Support. The tool is guided by the Universal Support, which also guides the jigs. This ensures that the stone surface is always parallel to the tool fitted in the jig.


Benefits compared with our existing ADV-50D and other tools on the market

1. Easy feeding across the stone
You can conveniently and without pressing with your thumbs feed the diamond cutter across the stone. You achieve an even feeding by alternately turning the two knobs with both your hands. The feed can be made in both directions.

Thanks to the controlled feed, you get an even and flat stone surface with no ridges. There is no need to flatten afterwards with the Stone Grader SP‑650. The slower you feed, the finer the surface you will achieve. A traverse time of 90 seconds across the stone gives you a good finish with hardly any visible grooves.

2. Controlled cutting depth
The cutting depth is set exactly by the Micro Adjust on the Universal Support. New Universal Supports will have a scale with increments for each 0,25 mm. You can also use your existing Micro Adjust, which has no scale. A cutting depth of 0,25 mm corresponds to a sixth of a full turn.

3. Increased steel removal
With a higher feed speed across the stone (approximately 30 seconds instead of 90 seconds) the surface will have pronounced grooves, which will cause the stone to grind faster. This is beneficial, when sharpening or shaping tools in hard steel with a large bevel area, e.g. turning skew chisels and electric jointer/planer blades.


For existing Tormek owners
If you have an older machine, which has no Micro Adjust on the Universal Support, you can retrofit the new Universal Support with Micro Adjust, US-105. You can also use the existing Universal Support, but this is less convenient.

The new Universal Support with Micro Adjust is also a great advantage when using the Tormek jigs.

If you have the existing Truing Tool ADV-50D you can purchase the TT-50 without the diamond cutting tip at a reduced price and mount your existing diamond cutting tip. Ask us for the TT-50U.

Suitable for following sharpeners

Tormek T-3
Tormek T-7


Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.

Art.Nr.Product Name Price Qty
TT-50 Truing Tool
SKr 380.00
Add Items to Cart


 

My Cart

You have no items in your shopping cart.

CONTACT
You can also order through
our customer service
Phone:
+46 (0)8 122 094 20
Fax:
+46 (0)8 122 094 30
Email:
Office hours:
Mon-Fri 8.30 - 17.00 CET

Freight

New! The freight cost within Sweden is now only 80 SEK per order Read more